Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MP6500SP Top Searches

These results are ranked by popularity.

Error
781Description: Z-Fold lower stopper motor The lower stopper motor does not attain the prescribed speed within the specified time.
701Description: ADF bottom plate motor error • Bottom plate position sensor does not detect the plate after the bottom plate lift motor switches on to lift the plate. • Bottom plate HP sensor does not detect the plate after the bottom plate motor reverse
900Description: Electrical total counter error The total counter contains something that is not a number.
507Description: LCT feed motor malfunction One of the following conditions is detected: • The LD signal from the feed motor is detected abnormal for 50 ms after the motor switches on. • At power on, the motor is detected loose or disconnected
741Description: Finisher corner stapler rotation motor error B246 The stapler does not return to its home position within the specified time after stapling. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.

Ricoh MP6500SP Common Errors

The most common error codes.

Error
781Description: Z-Fold lower stopper motor The lower stopper motor does not attain the prescribed speed within the specified time.
701Description: ADF bottom plate motor error • Bottom plate position sensor does not detect the plate after the bottom plate lift motor switches on to lift the plate. • Bottom plate HP sensor does not detect the plate after the bottom plate motor reverse
900Description: Electrical total counter error The total counter contains something that is not a number.
507Description: LCT feed motor malfunction One of the following conditions is detected: • The LD signal from the feed motor is detected abnormal for 50 ms after the motor switches on. • At power on, the motor is detected loose or disconnected
741Description: Finisher corner stapler rotation motor error B246 The stapler does not return to its home position within the specified time after stapling. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
741Description: Finisher corner stapler rotation motor error B246 The stapler does not return to its home position within the specified time after stapling. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
781Description: Z-Fold lower stopper motor The lower stopper motor does not attain the prescribed speed within the specified time.
507Description: LCT feed motor malfunction One of the following conditions is detected: • The LD signal from the feed motor is detected abnormal for 50 ms after the motor switches on. • At power on, the motor is detected loose or disconnected
701Description: ADF bottom plate motor error • Bottom plate position sensor does not detect the plate after the bottom plate lift motor switches on to lift the plate. • Bottom plate HP sensor does not detect the plate after the bottom plate motor reverse
900Description: Electrical total counter error The total counter contains something that is not a number.