Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MP5002SP Top Searches

These results are ranked by popularity.

Error
700-12Description: Scanner feeding error 1: DF fan motor 1 error DF fan motor lock signal is detected after the original transportation has finished.
320Description: Development roller bias leak The maximum PMW duty (65%) is detected for 60 ms after the high voltage has been supplied to the development unit.
867Description: SD card error 2: SD card removed The SD card in the slot is removed while the machine is on.
792Description: Finisher error The machine does not recognize the finisher, but recognizes the bridge unit.
557Description: Zero cross frequency error When the zero cross signal is 66 or more and it is detected 10 times or more in 11 detections, the machine determines that input 60 Hz and SC557 occurs.

Ricoh MP5002SP Common Errors

The most common error codes.

Error
700-12Description: Scanner feeding error 1: DF fan motor 1 error DF fan motor lock signal is detected after the original transportation has finished.
320Description: Development roller bias leak The maximum PMW duty (65%) is detected for 60 ms after the high voltage has been supplied to the development unit.
867Description: SD card error 2: SD card removed The SD card in the slot is removed while the machine is on.
792Description: Finisher error The machine does not recognize the finisher, but recognizes the bridge unit.
557Description: Zero cross frequency error When the zero cross signal is 66 or more and it is detected 10 times or more in 11 detections, the machine determines that input 60 Hz and SC557 occurs.
700-12Description: Scanner feeding error 1: DF fan motor 1 error DF fan motor lock signal is detected after the original transportation has finished.
320Description: Development roller bias leak The maximum PMW duty (65%) is detected for 60 ms after the high voltage has been supplied to the development unit.
867Description: SD card error 2: SD card removed The SD card in the slot is removed while the machine is on.
792Description: Finisher error The machine does not recognize the finisher, but recognizes the bridge unit.
557Description: Zero cross frequency error When the zero cross signal is 66 or more and it is detected 10 times or more in 11 detections, the machine determines that input 60 Hz and SC557 occurs.