Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MP5000 Top Searches

These results are ranked by popularity.

Error
553Description: Fusing overheat error 1 (software detection) A fusing temperature (at the end) of over 230 °C (446 °F) is detected for 1 second by the fusing thermistors at the center or at either end of the fusing roller.
727Description: Shift jogger motor 2 error The side fence does not retract within the prescribed time after the shift jogger motor 2 switches on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
26Description: Shift jogger motor 1 error The side fence does not retract within the prescribed time after the shift jogger motor 1 switches on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
855Description: Wireless LAN error 3 An error is detected on the wireless LAN card (802.11a/g, g or Bluetooth).
501Description: 1st tray lift malfunctionThe tray lift sensor is not activated after the tray lift motor has been on for 10 seconds. If the main power switch is turned on when the paper is already at the feed height, the paper height position is detected ag

Ricoh MP5000 Common Errors

The most common error codes.

Error
553Description: Fusing overheat error 1 (software detection) A fusing temperature (at the end) of over 230 °C (446 °F) is detected for 1 second by the fusing thermistors at the center or at either end of the fusing roller.
727Description: Shift jogger motor 2 error The side fence does not retract within the prescribed time after the shift jogger motor 2 switches on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
26Description: Shift jogger motor 1 error The side fence does not retract within the prescribed time after the shift jogger motor 1 switches on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
855Description: Wireless LAN error 3 An error is detected on the wireless LAN card (802.11a/g, g or Bluetooth).
501Description: 1st tray lift malfunctionThe tray lift sensor is not activated after the tray lift motor has been on for 10 seconds. If the main power switch is turned on when the paper is already at the feed height, the paper height position is detected ag
553Description: Fusing overheat error 1 (software detection) A fusing temperature (at the end) of over 230 °C (446 °F) is detected for 1 second by the fusing thermistors at the center or at either end of the fusing roller.
727Description: Shift jogger motor 2 error The side fence does not retract within the prescribed time after the shift jogger motor 2 switches on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
26Description: Shift jogger motor 1 error The side fence does not retract within the prescribed time after the shift jogger motor 1 switches on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
855Description: Wireless LAN error 3 An error is detected on the wireless LAN card (802.11a/g, g or Bluetooth).
501Description: 1st tray lift malfunctionThe tray lift sensor is not activated after the tray lift motor has been on for 10 seconds. If the main power switch is turned on when the paper is already at the feed height, the paper height position is detected ag