Ricoh MP4002 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MP4002 Top Searches

These results are ranked by popularity.

Error
701-03Description: Scanner feeding error 2: Paper feed motor error The error flag of the paper feed motor driver IC is asserted when the jam error is issued.
792Description: Finisher error The machine does not recognize the finisher, but recognizes the bridge unit.
842Description: Flash ROM verification error Verification error of the flash ROM on the controller board occurs This SC is logged at 1st error detection.SC819 is issued at 2nd error detection. SC819 is issued at 2nd error detection
532Description: Cooling fan motor error The machine does not detect the fan motor lock signal for 10 seconds after turning on the cooling fan motor.
143Description: SBU auto adjust error One of the following occurred: • When the machine was powered on, automatic adjustment of the SBU failed. • Automatic white density adjustment failed when reading standard white plate.

Ricoh MP4002 Common Errors

The most common error codes.

Error
701-03Description: Scanner feeding error 2: Paper feed motor error The error flag of the paper feed motor driver IC is asserted when the jam error is issued.
792Description: Finisher error The machine does not recognize the finisher, but recognizes the bridge unit.
842Description: Flash ROM verification error Verification error of the flash ROM on the controller board occurs This SC is logged at 1st error detection.SC819 is issued at 2nd error detection. SC819 is issued at 2nd error detection
532Description: Cooling fan motor error The machine does not detect the fan motor lock signal for 10 seconds after turning on the cooling fan motor.
143Description: SBU auto adjust error One of the following occurred: • When the machine was powered on, automatic adjustment of the SBU failed. • Automatic white density adjustment failed when reading standard white plate.
701-03Description: Scanner feeding error 2: Paper feed motor error The error flag of the paper feed motor driver IC is asserted when the jam error is issued.
792Description: Finisher error The machine does not recognize the finisher, but recognizes the bridge unit.
842Description: Flash ROM verification error Verification error of the flash ROM on the controller board occurs This SC is logged at 1st error detection.SC819 is issued at 2nd error detection. SC819 is issued at 2nd error detection
532Description: Cooling fan motor error The machine does not detect the fan motor lock signal for 10 seconds after turning on the cooling fan motor.
143Description: SBU auto adjust error One of the following occurred: • When the machine was powered on, automatic adjustment of the SBU failed. • Automatic white density adjustment failed when reading standard white plate.