Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MP3555 Top Searches

These results are ranked by popularity.

Error
SC559-00Description: Fusing Jam Detected for 3 Times Consecutively Fusing jam (does not reach fusing exit sensor) is detected for 3 times consecutively. • Detection conditions Displays the SC559-00 at the time of integrating the counter each time fusing jam occu
SC272-01Description: LD Driver Communication Error If the value is not same when the machine reads and writes the same registration at the machine start-up. If the communication parity retries three consecutive times, the SC is generated.
SC702-03Description: Protection Device Intercept Error 3 (ARDF) When original source 5V power supply is ON, protection device intercept of 5VE power supply system is detected
SC727-12Description: Internal Multi-fold Unit FD3000 Error Registration Motor Error Motor error (Encoder error) This is reported as a jam error when detected for the first time. If it occurs again in a row, its SC code appears.
SC722-06Description: Finisher SR3210 (D3B8) Error Access error to NVRAM Error occurs when accessing NVRAM.

Ricoh MP3555 Common Errors

The most common error codes.

Error
SC559-00Description: Fusing Jam Detected for 3 Times Consecutively Fusing jam (does not reach fusing exit sensor) is detected for 3 times consecutively. • Detection conditions Displays the SC559-00 at the time of integrating the counter each time fusing jam occu
SC272-01Description: LD Driver Communication Error If the value is not same when the machine reads and writes the same registration at the machine start-up. If the communication parity retries three consecutive times, the SC is generated.
SC702-03Description: Protection Device Intercept Error 3 (ARDF) When original source 5V power supply is ON, protection device intercept of 5VE power supply system is detected
SC727-12Description: Internal Multi-fold Unit FD3000 Error Registration Motor Error Motor error (Encoder error) This is reported as a jam error when detected for the first time. If it occurs again in a row, its SC code appears.
SC722-06Description: Finisher SR3210 (D3B8) Error Access error to NVRAM Error occurs when accessing NVRAM.
SC702-03Description: Protection Device Intercept Error 3 (ARDF) When original source 5V power supply is ON, protection device intercept of 5VE power supply system is detected
SC272-01Description: LD Driver Communication Error If the value is not same when the machine reads and writes the same registration at the machine start-up. If the communication parity retries three consecutive times, the SC is generated.
SC727-12Description: Internal Multi-fold Unit FD3000 Error Registration Motor Error Motor error (Encoder error) This is reported as a jam error when detected for the first time. If it occurs again in a row, its SC code appears.
SC940-50Description: Key Counter Error When the key counter is ON, the registration value of the key counter detection signal 2 is "1" three times consecutively.
SC559-00Description: Fusing Jam Detected for 3 Times Consecutively Fusing jam (does not reach fusing exit sensor) is detected for 3 times consecutively. • Detection conditions Displays the SC559-00 at the time of integrating the counter each time fusing jam occu