These results are ranked by popularity.
| Error | |
|---|---|
| SC530 | Description: Fusing exhaust fan motor error • This fan is located on the left side of the machine, next to the PSU. The machine does not detect the motor lock signal for 10 seconds while the motor is running. |
| SC816-01 | Description: Subsystem error |
| SC120 | Description: Scanner Home Position Error 1 The scanner home position sensor does not go OFF. Details: Error detection timing • During homing (when the machine is turned ON or when it returns from energy save mode) • During an automatic adjustment (when t |
| SC721-53 | Description: Rear End Fence Displacement Motor Error (1000-sheet finisher) • During movement to home, the home position could not be detected within a predetermined pulse (p0 pulse) (1st time is jam notification, 2nd time is SC notification). • During mo |
| SC669-22 | Description: EEPROM Data read: Communication abort error |
The most common error codes.
| Error | |
|---|---|
| SC530 | Description: Fusing exhaust fan motor error • This fan is located on the left side of the machine, next to the PSU. The machine does not detect the motor lock signal for 10 seconds while the motor is running. |
| SC816-01 | Description: Subsystem error |
| SC120 | Description: Scanner Home Position Error 1 The scanner home position sensor does not go OFF. Details: Error detection timing • During homing (when the machine is turned ON or when it returns from energy save mode) • During an automatic adjustment (when t |
| SC721-53 | Description: Rear End Fence Displacement Motor Error (1000-sheet finisher) • During movement to home, the home position could not be detected within a predetermined pulse (p0 pulse) (1st time is jam notification, 2nd time is SC notification). • During mo |
| SC669-22 | Description: EEPROM Data read: Communication abort error |
| SC530 | Description: Fusing exhaust fan motor error • This fan is located on the left side of the machine, next to the PSU. The machine does not detect the motor lock signal for 10 seconds while the motor is running. |
| SC816-01 | Description: Subsystem error |
| SC120 | Description: Scanner Home Position Error 1 The scanner home position sensor does not go OFF. Details: Error detection timing • During homing (when the machine is turned ON or when it returns from energy save mode) • During an automatic adjustment (when t |
| SC721-53 | Description: Rear End Fence Displacement Motor Error (1000-sheet finisher) • During movement to home, the home position could not be detected within a predetermined pulse (p0 pulse) (1st time is jam notification, 2nd time is SC notification). • During mo |
| SC669-22 | Description: EEPROM Data read: Communication abort error |
