Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MP3055 Top Searches

These results are ranked by popularity.

Error
SC722-70Description: Finisher SR3210 (D3B8) Error Tray Lift Motor Error • Motor driver detects an error (short-circuit or overheating) (1st time is SC). • During descent, the paper surface sensor still detects paper even after a predetermined time (t0sec) elapse
SC792-00Description: No Finisher, Bridge Unit Provided When power supply is switched on, it is recognized there is no finisher, and a bridge unit is fitted.
SC589-01Description: Fusing center: Low Temperature Detection When the thermopile (center) detects the temperature which is 180 degrees Centigrade lower than target Temperature for 12 seconds consecutively.
SC440-00Description: High Voltage Power Source: Paper Transfer : Output Error The machine detects the error detection signal “L (unexpected)” 10 times for 200 msec consecutively when monitoring the error signal every 20 msec during outputting the PWM signal.
SC720-42Description: Booklet Finisher SR3240/Finisher SR3230 Error Corner Stapler Movement Motor Error • During movement to home, the home position could not be detected within a predetermined pulse (1st time is jam notification, 2nd time is SC notification). •

Ricoh MP3055 Common Errors

The most common error codes.

Error
SC722-70Description: Finisher SR3210 (D3B8) Error Tray Lift Motor Error • Motor driver detects an error (short-circuit or overheating) (1st time is SC). • During descent, the paper surface sensor still detects paper even after a predetermined time (t0sec) elapse
SC792-00Description: No Finisher, Bridge Unit Provided When power supply is switched on, it is recognized there is no finisher, and a bridge unit is fitted.
SC589-01Description: Fusing center: Low Temperature Detection When the thermopile (center) detects the temperature which is 180 degrees Centigrade lower than target Temperature for 12 seconds consecutively.
SC440-00Description: High Voltage Power Source: Paper Transfer : Output Error The machine detects the error detection signal “L (unexpected)” 10 times for 200 msec consecutively when monitoring the error signal every 20 msec during outputting the PWM signal.
SC720-42Description: Booklet Finisher SR3240/Finisher SR3230 Error Corner Stapler Movement Motor Error • During movement to home, the home position could not be detected within a predetermined pulse (1st time is jam notification, 2nd time is SC notification). •
SC440-00Description: High Voltage Power Source: Paper Transfer : Output Error The machine detects the error detection signal “L (unexpected)” 10 times for 200 msec consecutively when monitoring the error signal every 20 msec during outputting the PWM signal.
SC792-00Description: No Finisher, Bridge Unit Provided When power supply is switched on, it is recognized there is no finisher, and a bridge unit is fitted.
SC541-03Description: NC Sensor (Center) Short-circuit AD value: 0-13 (FB voltage: 0.000V-0.041V) is detected for specified seconds continuously. Detection period: 100 ms, detection frequency: 10 times or more.
SC867-02Description: SD card removed The SD card was removed while the machine is on.
SC589-01Description: Fusing center: Low Temperature Detection When the thermopile (center) detects the temperature which is 180 degrees Centigrade lower than target Temperature for 12 seconds consecutively.