Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MP2501L Top Searches

These results are ranked by popularity.

Error
302Description: Charge roller current leak A current leak signal for the charge roller is detected.
928Description: Memory error (D160/D161/D170) The machine detects a discrepancy in the write/read data during its write/read test (done at power off/on and at recovery from low power or night/off mode).
544Description: Fusing overheat error (center) 2 The fusing temperature is over 250°C for more than a certain time (zero cross signal x 3). (detected by the fusing temperature monitor circuit).
101Description: Exposure Lamp Error (D160/D161/D170) The standard white level was not detected properly when scanning the white plate.
590Description: Left exhaust fan motor error (D160/D161/D170) The CPU detects an exhaust fan lock signal for more than 5 seconds.

Ricoh MP2501L Common Errors

The most common error codes.

Error
302Description: Charge roller current leak A current leak signal for the charge roller is detected.
928Description: Memory error (D160/D161/D170) The machine detects a discrepancy in the write/read data during its write/read test (done at power off/on and at recovery from low power or night/off mode).
544Description: Fusing overheat error (center) 2 The fusing temperature is over 250°C for more than a certain time (zero cross signal x 3). (detected by the fusing temperature monitor circuit).
101Description: Exposure Lamp Error (D160/D161/D170) The standard white level was not detected properly when scanning the white plate.
590Description: Left exhaust fan motor error (D160/D161/D170) The CPU detects an exhaust fan lock signal for more than 5 seconds.
544Description: Fusing overheat error (center) 2 The fusing temperature is over 250°C for more than a certain time (zero cross signal x 3). (detected by the fusing temperature monitor circuit).
302Description: Charge roller current leak A current leak signal for the charge roller is detected.
928Description: Memory error (D160/D161/D170) The machine detects a discrepancy in the write/read data during its write/read test (done at power off/on and at recovery from low power or night/off mode).
391Description: Development bias leak A development bias leak signal is detected.
490Description: Toner transport motor error (D158/D159) When the toner transport motor is ON