Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MP2001 Top Searches

These results are ranked by popularity.

Error
928Description: Memory error (D160/D161/D170) The machine detects a discrepancy in the write/read data during its write/read test (done at power off/on and at recovery from low power or night/off mode).
302Description: Charge roller current leak A current leak signal for the charge roller is detected.
544Description: Fusing overheat error (center) 2 The fusing temperature is over 250°C for more than a certain time (zero cross signal x 3). (detected by the fusing temperature monitor circuit).
391Description: Development bias leak A development bias leak signal is detected.
554Description: Heating roller fusing lamp overheat 2 (hardware error) (D158/D159)

Ricoh MP2001 Common Errors

The most common error codes.

Error
928Description: Memory error (D160/D161/D170) The machine detects a discrepancy in the write/read data during its write/read test (done at power off/on and at recovery from low power or night/off mode).
302Description: Charge roller current leak A current leak signal for the charge roller is detected.
544Description: Fusing overheat error (center) 2 The fusing temperature is over 250°C for more than a certain time (zero cross signal x 3). (detected by the fusing temperature monitor circuit).
391Description: Development bias leak A development bias leak signal is detected.
554Description: Heating roller fusing lamp overheat 2 (hardware error) (D158/D159)
928Description: Memory error (D160/D161/D170) The machine detects a discrepancy in the write/read data during its write/read test (done at power off/on and at recovery from low power or night/off mode).
302Description: Charge roller current leak A current leak signal for the charge roller is detected.
544Description: Fusing overheat error (center) 2 The fusing temperature is over 250°C for more than a certain time (zero cross signal x 3). (detected by the fusing temperature monitor circuit).
391Description: Development bias leak A development bias leak signal is detected.
554Description: Heating roller fusing lamp overheat 2 (hardware error) (D158/D159)