Ricoh MP1911 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MP1911 Top Searches

These results are ranked by popularity.

Error
692Description: Controller board communication abnormal Communication error between the printer part of the controller board and BICU.
390Description: TD sensor error The TD sensor outputs less than 0.2 V or more than 4.0 V 10 times consecutively during copying.
543Description: Fusing overheat error (center) The fusing temperature is over 230°C and continues 10 times consecutively. (100ms x 10 = 1 second). (detected by the thermistor).
903Description: Engine total counter error The checksum of the total counter is not correct.
694Description: Controller board communication abnormal Communication error between the scanner part of the controller board and BICU.

Ricoh MP1911 Common Errors

The most common error codes.

Error
692Description: Controller board communication abnormal Communication error between the printer part of the controller board and BICU.
390Description: TD sensor error The TD sensor outputs less than 0.2 V or more than 4.0 V 10 times consecutively during copying.
543Description: Fusing overheat error (center) The fusing temperature is over 230°C and continues 10 times consecutively. (100ms x 10 = 1 second). (detected by the thermistor).
903Description: Engine total counter error The checksum of the total counter is not correct.
694Description: Controller board communication abnormal Communication error between the scanner part of the controller board and BICU.
692Description: Controller board communication abnormal Communication error between the printer part of the controller board and BICU.
390Description: TD sensor error The TD sensor outputs less than 0.2 V or more than 4.0 V 10 times consecutively during copying.
543Description: Fusing overheat error (center) The fusing temperature is over 230°C and continues 10 times consecutively. (100ms x 10 = 1 second). (detected by the thermistor).
903Description: Engine total counter error The checksum of the total counter is not correct.
694Description: Controller board communication abnormal Communication error between the scanner part of the controller board and BICU.