Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MP171F Top Searches

These results are ranked by popularity.

Error
543Description: Fusing overheat error 1 The fusing temperature detected by the thermistor is 230°C or higher for one second.
636-001Description: SD Card ErrorExpanded authentication module error There is no expanded authentication module in the machine. The SD card or the file of the expanded authentication module is broken. There is no DESS module in the machine.
101Description: Exposure Lamp Error The scanner has scanned the white plate, but cannot detect the white level.
650-005Description: Communication error of the remote service modem (Cumin-M) Communication line error -The supplied voltage is not sufficient due to the defective communication line or defective connection.
321Description: No laser writing signal (F-GATE) error The poling module does not detect the laser writing signal (F-GATE) asserting after the laser crosses 5 mm from the start point on the drum surface.

Ricoh MP171F Common Errors

The most common error codes.

Error
543Description: Fusing overheat error 1 The fusing temperature detected by the thermistor is 230°C or higher for one second.
636-001Description: SD Card ErrorExpanded authentication module error There is no expanded authentication module in the machine. The SD card or the file of the expanded authentication module is broken. There is no DESS module in the machine.
101Description: Exposure Lamp Error The scanner has scanned the white plate, but cannot detect the white level.
650-005Description: Communication error of the remote service modem (Cumin-M) Communication line error -The supplied voltage is not sufficient due to the defective communication line or defective connection.
321Description: No laser writing signal (F-GATE) error The poling module does not detect the laser writing signal (F-GATE) asserting after the laser crosses 5 mm from the start point on the drum surface.
543Description: Fusing overheat error 1 The fusing temperature detected by the thermistor is 230°C or higher for one second.
636-001Description: SD Card ErrorExpanded authentication module error There is no expanded authentication module in the machine. The SD card or the file of the expanded authentication module is broken. There is no DESS module in the machine.
101Description: Exposure Lamp Error The scanner has scanned the white plate, but cannot detect the white level.
650-005Description: Communication error of the remote service modem (Cumin-M) Communication line error -The supplied voltage is not sufficient due to the defective communication line or defective connection.
321Description: No laser writing signal (F-GATE) error The poling module does not detect the laser writing signal (F-GATE) asserting after the laser crosses 5 mm from the start point on the drum surface.