Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MP161LN Top Searches

These results are ranked by popularity.

Error
543Description: Fusing overheat error 1 The fusing temperature detected by the thermistor is 230°C or higher for one second.
694Description: Scanner board communication error • BICU does not get a signal from the scanner board for 1.5 seconds or more. • BICU gets a break-signal after completing the communication with the scanner board and does not get a signal from the scanner
901Description: Mechanical total counter error The polling module does not detect the mechanical total counter.
101Description: Exposure Lamp Error The scanner has scanned the white plate, but cannot detect the white level.
321Description: No laser writing signal (F-GATE) error The poling module does not detect the laser writing signal (F-GATE) asserting after the laser crosses 5 mm from the start point on the drum surface.

Ricoh MP161LN Common Errors

The most common error codes.

Error
543Description: Fusing overheat error 1 The fusing temperature detected by the thermistor is 230°C or higher for one second.
694Description: Scanner board communication error • BICU does not get a signal from the scanner board for 1.5 seconds or more. • BICU gets a break-signal after completing the communication with the scanner board and does not get a signal from the scanner
901Description: Mechanical total counter error The polling module does not detect the mechanical total counter.
101Description: Exposure Lamp Error The scanner has scanned the white plate, but cannot detect the white level.
321Description: No laser writing signal (F-GATE) error The poling module does not detect the laser writing signal (F-GATE) asserting after the laser crosses 5 mm from the start point on the drum surface.
543Description: Fusing overheat error 1 The fusing temperature detected by the thermistor is 230°C or higher for one second.
694Description: Scanner board communication error • BICU does not get a signal from the scanner board for 1.5 seconds or more. • BICU gets a break-signal after completing the communication with the scanner board and does not get a signal from the scanner
901Description: Mechanical total counter error The polling module does not detect the mechanical total counter.
101Description: Exposure Lamp Error The scanner has scanned the white plate, but cannot detect the white level.
321Description: No laser writing signal (F-GATE) error The poling module does not detect the laser writing signal (F-GATE) asserting after the laser crosses 5 mm from the start point on the drum surface.