Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MP161 Top Searches

These results are ranked by popularity.

Error
692Description: Printer board communication error • BICU does not get a signal from the printer board for 1.5 seconds or more. • BICU gets a break-signal after completing the communication with the printer board and does not get a signal from the printer
320Description: Polygonal mirror motor error The polygon mirror motor does not reach the operating speed within 10 seconds. Or, the polygon mirror motor remains out of the operating speed for 0.2 second after reaching the operating speed.
543Description: Fusing overheat error 1 The fusing temperature detected by the thermistor is 230°C or higher for one second.
101Description: Exposure Lamp Error The scanner has scanned the white plate, but cannot detect the white level.
901Description: Mechanical total counter error The polling module does not detect the mechanical total counter.

Ricoh MP161 Common Errors

The most common error codes.

Error
692Description: Printer board communication error • BICU does not get a signal from the printer board for 1.5 seconds or more. • BICU gets a break-signal after completing the communication with the printer board and does not get a signal from the printer
320Description: Polygonal mirror motor error The polygon mirror motor does not reach the operating speed within 10 seconds. Or, the polygon mirror motor remains out of the operating speed for 0.2 second after reaching the operating speed.
543Description: Fusing overheat error 1 The fusing temperature detected by the thermistor is 230°C or higher for one second.
101Description: Exposure Lamp Error The scanner has scanned the white plate, but cannot detect the white level.
901Description: Mechanical total counter error The polling module does not detect the mechanical total counter.
692Description: Printer board communication error • BICU does not get a signal from the printer board for 1.5 seconds or more. • BICU gets a break-signal after completing the communication with the printer board and does not get a signal from the printer
320Description: Polygonal mirror motor error The polygon mirror motor does not reach the operating speed within 10 seconds. Or, the polygon mirror motor remains out of the operating speed for 0.2 second after reaching the operating speed.
543Description: Fusing overheat error 1 The fusing temperature detected by the thermistor is 230°C or higher for one second.
101Description: Exposure Lamp Error The scanner has scanned the white plate, but cannot detect the white level.
901Description: Mechanical total counter error The polling module does not detect the mechanical total counter.