Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MP1500 Top Searches

These results are ranked by popularity.

Error
504Description: Tray 4 lift motor malfunction (optional two-tray paper tray unit) The paper lift sensor fails to activate twice continuously after the tray lift motor has been on for 18 seconds.
824Description: Self-diagnostic Error: NVRAM The resident non-volatile RAM returned an error during the self-diagnostic test.
955Description: Image transfer error The controller is not able to transfer images when the engine needs them.
553Description: Fusing overheat error (rear) The fusing temperature is over 230C for 1 second (detected by the thermistor).
101Description: Exposure Lamp Error The scanner has scanned the white plate, but cannot detect the white level.

Ricoh MP1500 Common Errors

The most common error codes.

Error
504Description: Tray 4 lift motor malfunction (optional two-tray paper tray unit) The paper lift sensor fails to activate twice continuously after the tray lift motor has been on for 18 seconds.
824Description: Self-diagnostic Error: NVRAM The resident non-volatile RAM returned an error during the self-diagnostic test.
955Description: Image transfer error The controller is not able to transfer images when the engine needs them.
553Description: Fusing overheat error (rear) The fusing temperature is over 230C for 1 second (detected by the thermistor).
101Description: Exposure Lamp Error The scanner has scanned the white plate, but cannot detect the white level.
504Description: Tray 4 lift motor malfunction (optional two-tray paper tray unit) The paper lift sensor fails to activate twice continuously after the tray lift motor has been on for 18 seconds.
824Description: Self-diagnostic Error: NVRAM The resident non-volatile RAM returned an error during the self-diagnostic test.
955Description: Image transfer error The controller is not able to transfer images when the engine needs them.
553Description: Fusing overheat error (rear) The fusing temperature is over 230C for 1 second (detected by the thermistor).
101Description: Exposure Lamp Error The scanner has scanned the white plate, but cannot detect the white level.