Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MP1100 Top Searches

These results are ranked by popularity.

Error
SC497Description: Development Unit Toner Suction Bottle Error During machine operation, the development unit toner suction bottle set sensor goes off for 3 s.
SC231Description: FGATE Error 2: Signal Failed to Turn Off The FGATE signal did not switch off within 7 s of when the lasers started writing the image, or remained off at the beginning of the next job.
SC704Description: ADF Feed-Out Motor Error While the feed-out motor is operating, the encoder pulse signal is not received within the specified time, and the feed-out motor does not turn properly
SC911Description: External Controller Error 2
SC770Description: Cover Interposer Lift Motor 1 Error In the first tray: • The upper limit sensor did not detect the bottom plate within the specified time after the lift motor switched on to lift the bottom plate. • The lower limit sensor did not direct

Ricoh MP1100 Common Errors

The most common error codes.

Error
SC497Description: Development Unit Toner Suction Bottle Error During machine operation, the development unit toner suction bottle set sensor goes off for 3 s.
SC231Description: FGATE Error 2: Signal Failed to Turn Off The FGATE signal did not switch off within 7 s of when the lasers started writing the image, or remained off at the beginning of the next job.
SC704Description: ADF Feed-Out Motor Error While the feed-out motor is operating, the encoder pulse signal is not received within the specified time, and the feed-out motor does not turn properly
SC911Description: External Controller Error 2
SC770Description: Cover Interposer Lift Motor 1 Error In the first tray: • The upper limit sensor did not detect the bottom plate within the specified time after the lift motor switched on to lift the bottom plate. • The lower limit sensor did not direct
SC704Description: ADF Feed-Out Motor Error While the feed-out motor is operating, the encoder pulse signal is not received within the specified time, and the feed-out motor does not turn properly
SC497Description: Development Unit Toner Suction Bottle Error During machine operation, the development unit toner suction bottle set sensor goes off for 3 s.
SC770Description: Cover Interposer Lift Motor 1 Error In the first tray: • The upper limit sensor did not detect the bottom plate within the specified time after the lift motor switched on to lift the bottom plate. • The lower limit sensor did not direct
SC231Description: FGATE Error 2: Signal Failed to Turn Off The FGATE signal did not switch off within 7 s of when the lasers started writing the image, or remained off at the beginning of the next job.
SC911Description: External Controller Error 2