Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh MP01 Top Searches

These results are ranked by popularity.

Error
SC507Description: LCT motor error (optional LCT only) -Definition- [C] The paper upper limit sensor is not activated after the tray motor has been on to lift up the tray for 23 seconds, or the paper lower limit sensor is not activated after the tray motor has
SC302Description: High voltage power supply error -Definition- [B] A charge roller current leak signal is detected. A transfer roller current leak signal is detected. A separation bias leak signal is detected. A development bias leak signal is detected.
SC542Description: Fusing temperature warm-up error -Definition- [A] The fusing temperature does not reach the fusing standby temperature within 60 seconds after the main switch is turned on or after the covers have been closed. Or, during warming-up, the fusi
SC306Description: Charge roller home position error -Definition- [B] The charge roller H. P. sensor does not detect the on condition.
SC543Description: Fusing overheat error -Definition- [A] A fusing temperature of over 230°C is detected for 1 second by the fusing thermistor. A fusing temperature of over 250°C is detected for 3 seconds by the fusing edge thermistor during printing.

Ricoh MP01 Common Errors

The most common error codes.

Error
SC507Description: LCT motor error (optional LCT only) -Definition- [C] The paper upper limit sensor is not activated after the tray motor has been on to lift up the tray for 23 seconds, or the paper lower limit sensor is not activated after the tray motor has
SC302Description: High voltage power supply error -Definition- [B] A charge roller current leak signal is detected. A transfer roller current leak signal is detected. A separation bias leak signal is detected. A development bias leak signal is detected.
SC542Description: Fusing temperature warm-up error -Definition- [A] The fusing temperature does not reach the fusing standby temperature within 60 seconds after the main switch is turned on or after the covers have been closed. Or, during warming-up, the fusi
SC306Description: Charge roller home position error -Definition- [B] The charge roller H. P. sensor does not detect the on condition.
SC543Description: Fusing overheat error -Definition- [A] A fusing temperature of over 230°C is detected for 1 second by the fusing thermistor. A fusing temperature of over 250°C is detected for 3 seconds by the fusing edge thermistor during printing.
SC507Description: LCT motor error (optional LCT only) -Definition- [C] The paper upper limit sensor is not activated after the tray motor has been on to lift up the tray for 23 seconds, or the paper lower limit sensor is not activated after the tray motor has
SC302Description: High voltage power supply error -Definition- [B] A charge roller current leak signal is detected. A transfer roller current leak signal is detected. A separation bias leak signal is detected. A development bias leak signal is detected.
SC542Description: Fusing temperature warm-up error -Definition- [A] The fusing temperature does not reach the fusing standby temperature within 60 seconds after the main switch is turned on or after the covers have been closed. Or, during warming-up, the fusi
SC306Description: Charge roller home position error -Definition- [B] The charge roller H. P. sensor does not detect the on condition.
SC543Description: Fusing overheat error -Definition- [A] A fusing temperature of over 230°C is detected for 1 second by the fusing thermistor. A fusing temperature of over 250°C is detected for 3 seconds by the fusing edge thermistor during printing.