Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh ML320D Top Searches

These results are ranked by popularity.

Error
829Description: Self-diagnostic Error: Optional RAM The optional RAM returned an error during the self-diagnostic test.
506Description: Paper feed motor lock (optional paper tray units) A motor lock signal is not detected for more than 1.5 s or the lock signal is not detected for more than 1.0 s during rotation.
901Description: Mechanical total counter The mechanical total counter does not work properly.
555Description: Fusing lamp overheat error (rear) After the fusing temperature reaches the target temperature, the fusing lamp does not turn off for 20 consecutive seconds.
620Description: Communication error between BICU and ADF The BICU does not receive a response from the ADF main board for 4 seconds or more. The BICU receives a break signal from the ADF main board.

Ricoh ML320D Common Errors

The most common error codes.

Error
829Description: Self-diagnostic Error: Optional RAM The optional RAM returned an error during the self-diagnostic test.
506Description: Paper feed motor lock (optional paper tray units) A motor lock signal is not detected for more than 1.5 s or the lock signal is not detected for more than 1.0 s during rotation.
901Description: Mechanical total counter The mechanical total counter does not work properly.
555Description: Fusing lamp overheat error (rear) After the fusing temperature reaches the target temperature, the fusing lamp does not turn off for 20 consecutive seconds.
620Description: Communication error between BICU and ADF The BICU does not receive a response from the ADF main board for 4 seconds or more. The BICU receives a break signal from the ADF main board.
829Description: Self-diagnostic Error: Optional RAM The optional RAM returned an error during the self-diagnostic test.
506Description: Paper feed motor lock (optional paper tray units) A motor lock signal is not detected for more than 1.5 s or the lock signal is not detected for more than 1.0 s during rotation.
901Description: Mechanical total counter The mechanical total counter does not work properly.
555Description: Fusing lamp overheat error (rear) After the fusing temperature reaches the target temperature, the fusing lamp does not turn off for 20 consecutive seconds.
620Description: Communication error between BICU and ADF The BICU does not receive a response from the ADF main board for 4 seconds or more. The BICU receives a break signal from the ADF main board.