These results are ranked by popularity.
| 203-00||Description: D Polygon motor: OFF timeout error Polygon motor has not stopped when 3 seconds have elapsed after the machine turned the polygon motor OFF.|
| 552-04||Description: D Reload failure: Thermistor (end) (H2) deformation: Low voltage An error is detected only when the input voltage at power-on is low. The temperature of 14°C or lower is detected five times consecutively for 3 seconds. • Measurem|
| 530-02||Description: D Exhaust fan (FAN1) error A motor lock error is detected for 5 seconds or more when the exhaust fan (FAN1) is turned on.|
| 672-21||Description: D Controller start up error This error occurs when communication between the MPU (controller) and operation panel could not be established after powering on the machine, or when communication between the MPU (controller) and operation|
| 354-00||Description: D ID sensor (S6): Auto adjustment timeout error (detailed) Factory Use only If Vsg is not automatically adjusted to 4.0±0.2 V twice consecutively when the ID sensor (S6) is adjusting Vsg automatically, this SC is issued (onl|