Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh IMC3000 Top Searches

These results are ranked by popularity.

Error
SC720-06Description: Booklet Finisher SR3290/Finisher SR3280 Error Access error to NVRAM Error occurs when accessing NV memory.
SC828-00Description: Self-diagnostic Error (ROM): Bootstrap Code Error [0101] Self-diagnostic Error (ROM): Bootstrap Code Error The CRC is calculated for the boot monitor and the OS program, and an error is detected when the result is different from expected. Ho
SC635-00Description: Counter device error 4 A backup battery error was returned by the counter device.
SC504-21Description: 4th Tray Lift Error (Two-tray paper feed unit) • Lift motor ascent error detection During tray initialization (upper limit not detected/lower limit detection), the tray base plate is raised to check the tray base plate position, but the uppe
SC721-80Description: Booklet Finisher SR3270 Error Folding Transport Motor Error • Motor driver detects an error (short-circuit or overheating) (1st time is SC)

Ricoh IMC3000 Common Errors

The most common error codes.

Error
SC720-06Description: Booklet Finisher SR3290/Finisher SR3280 Error Access error to NVRAM Error occurs when accessing NV memory.
SC828-00Description: Self-diagnostic Error (ROM): Bootstrap Code Error [0101] Self-diagnostic Error (ROM): Bootstrap Code Error The CRC is calculated for the boot monitor and the OS program, and an error is detected when the result is different from expected. Ho
SC635-00Description: Counter device error 4 A backup battery error was returned by the counter device.
SC504-21Description: 4th Tray Lift Error (Two-tray paper feed unit) • Lift motor ascent error detection During tray initialization (upper limit not detected/lower limit detection), the tray base plate is raised to check the tray base plate position, but the uppe
SC721-80Description: Booklet Finisher SR3270 Error Folding Transport Motor Error • Motor driver detects an error (short-circuit or overheating) (1st time is SC)
SC552-02Description: Thermopile (Edge) Does Not Reload In Machine Condition B, after turning the fusing lamp (edge) on, the thermopile (edge) (TH2) has failed to reach 65°C in 14 seconds. Machine Condition B refers to any of the following conditions: • In Warm-u
SC724-31Description: Internal Finisher SR3250 Error Jogger Front Motor Error • When front jogger motor is driven for specified time (msec.) when front jogger HP sensor is ON, the HP sensor does not switch OFF (Jam notification for 1st to 4th times, SC notificati
SC635-00Description: Counter device error 4 A backup battery error was returned by the counter device.
SC890-01Description: PaaS* function: Tampering detection PaaS data in NVRAM and on USB flash drive do not match at startup.
SC667-10Description: Slave1 Device Mode Setting Error The machine detects the Slave1 mode error when starting up, or recovery from energy saving mode.