Ricoh IM550FG Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh IM550FG Top Searches

These results are ranked by popularity.

Error
SC995-02Description: CPM setting error 2 Comparison of machine serial number (11 digits) and machine identification code. Details: Machine serial number cannot be identified because of NV-RAM replacement or malfunctioning.
SC860-03Description: HDD encryption key error at main power on (HDD error) The encryption key for reading the encrypted hard disk data has failed.
SC672-12Description: Controller startup error Communication with the controller was interrupted after a normal startup.
SC504-02Description: Paper Feed Tray Error (Tray 4) The error signal is detected for 2 seconds consecutively after the paper feed motor is activated.
SC871-02Description: FCU job error (Recovery possible) This SC occurs when the FCU has detected a job error (failure to start or complete a job) that may be recovered by the auto reboot.

Ricoh IM550FG Common Errors

The most common error codes.

Error
SC995-02Description: CPM setting error 2 Comparison of machine serial number (11 digits) and machine identification code. Details: Machine serial number cannot be identified because of NV-RAM replacement or malfunctioning.
SC860-03Description: HDD encryption key error at main power on (HDD error) The encryption key for reading the encrypted hard disk data has failed.
SC672-12Description: Controller startup error Communication with the controller was interrupted after a normal startup.
SC504-02Description: Paper Feed Tray Error (Tray 4) The error signal is detected for 2 seconds consecutively after the paper feed motor is activated.
SC871-02Description: FCU job error (Recovery possible) This SC occurs when the FCU has detected a job error (failure to start or complete a job) that may be recovered by the auto reboot.
SC995-02Description: CPM setting error 2 Comparison of machine serial number (11 digits) and machine identification code. Details: Machine serial number cannot be identified because of NV-RAM replacement or malfunctioning.
SC860-03Description: HDD encryption key error at main power on (HDD error) The encryption key for reading the encrypted hard disk data has failed.
SC672-12Description: Controller startup error Communication with the controller was interrupted after a normal startup.
SC504-02Description: Paper Feed Tray Error (Tray 4) The error signal is detected for 2 seconds consecutively after the paper feed motor is activated.
SC871-02Description: FCU job error (Recovery possible) This SC occurs when the FCU has detected a job error (failure to start or complete a job) that may be recovered by the auto reboot.