These results are ranked by popularity.
| 552-04||Description: D Reload failure: Thermistor (end) (H2) deformation: Low voltage An error is detected only when the input voltage at power-on is low. The temperature of 14°C or lower is detected five times consecutively for 3 seconds. • Measurem|
| 203-00||Description: D Polygon motor: OFF timeout error Polygon motor has not stopped when 3 seconds have elapsed after the machine turned the polygon motor OFF.|
| 672-21||Description: D Controller start up error This error occurs when communication between the MPU (controller) and operation panel could not be established after powering on the machine, or when communication between the MPU (controller) and operation|
| 530-02||Description: D Exhaust fan (FAN1) error A motor lock error is detected for 5 seconds or more when the exhaust fan (FAN1) is turned on.|
| 120-00||Description: D Scanner home position error 1 • The scanner home position sensor does not go OFF even if the scanner moves 30 mm at homing. • The scanner home position sensor does not go OFF even if the scanner moves 13 mm at the white balance|