Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh DX4542 Top Searches

These results are ranked by popularity.

Error
E-00Description: Clamper error The MPU cannot detect the clamper position sensor signal (open or closed) within 3.0 seconds after the clamper motor turns on.
E-21Description: Paper Exit Timing Sensor error The paper exit timing sensor does not activate before the master eject position sensor activates.
E-01Description: Cutter error The cutter HP sensor does not turn on within 3.0 seconds after the cutter motor turns on.
E-22Description: 2nd Feed Timing Sensor error The 2nd feed timing sensor does not activate before the paper exit timing sensor activates.
E-02Description: Paper Table Drive error The paper height sensor or the table lower limit sensor does not turn on within 7.5 seconds after the table motor turn on.

Ricoh DX4542 Common Errors

The most common error codes.

Error
E-00Description: Clamper error The MPU cannot detect the clamper position sensor signal (open or closed) within 3.0 seconds after the clamper motor turns on.
E-21Description: Paper Exit Timing Sensor error The paper exit timing sensor does not activate before the master eject position sensor activates.
E-01Description: Cutter error The cutter HP sensor does not turn on within 3.0 seconds after the cutter motor turns on.
E-22Description: 2nd Feed Timing Sensor error The 2nd feed timing sensor does not activate before the paper exit timing sensor activates.
E-02Description: Paper Table Drive error The paper height sensor or the table lower limit sensor does not turn on within 7.5 seconds after the table motor turn on.
E-00Description: Clamper error The MPU cannot detect the clamper position sensor signal (open or closed) within 3.0 seconds after the clamper motor turns on.
E-21Description: Paper Exit Timing Sensor error The paper exit timing sensor does not activate before the master eject position sensor activates.
E-01Description: Cutter error The cutter HP sensor does not turn on within 3.0 seconds after the cutter motor turns on.
E-22Description: 2nd Feed Timing Sensor error The 2nd feed timing sensor does not activate before the paper exit timing sensor activates.
E-02Description: Paper Table Drive error The paper height sensor or the table lower limit sensor does not turn on within 7.5 seconds after the table motor turn on.