Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh DX3343 Top Searches

These results are ranked by popularity.

Error
E-23Description: Master Eject Position Sensor (Drum HP) error The master eject position sensor does not activate before the feed start timing sensor activates.
E-00Description: Clamper Motor Failure The MPU cannot detect the clamper position sensor signal (open or closed) within 3.0 seconds after the clamper motor turns on.
E-24Description: Feed Start Timing Sensor error The feed start timing sensor does not activate before the 2nd feed timing sensor activates.
E-01Description: Cutter error The cutter HP sensor does not turn on within 3.0 seconds after the cutter motor turns on.
E-40Description: Thermal Head ID error The CPU detects an abnormal ID signal from the thermal head.

Ricoh DX3343 Common Errors

The most common error codes.

Error
E-23Description: Master Eject Position Sensor (Drum HP) error The master eject position sensor does not activate before the feed start timing sensor activates.
E-00Description: Clamper Motor Failure The MPU cannot detect the clamper position sensor signal (open or closed) within 3.0 seconds after the clamper motor turns on.
E-24Description: Feed Start Timing Sensor error The feed start timing sensor does not activate before the 2nd feed timing sensor activates.
E-01Description: Cutter error The cutter HP sensor does not turn on within 3.0 seconds after the cutter motor turns on.
E-40Description: Thermal Head ID error The CPU detects an abnormal ID signal from the thermal head.
E-23Description: Master Eject Position Sensor (Drum HP) error The master eject position sensor does not activate before the feed start timing sensor activates.
E-00Description: Clamper Motor Failure The MPU cannot detect the clamper position sensor signal (open or closed) within 3.0 seconds after the clamper motor turns on.
E-24Description: Feed Start Timing Sensor error The feed start timing sensor does not activate before the 2nd feed timing sensor activates.
E-01Description: Cutter error The cutter HP sensor does not turn on within 3.0 seconds after the cutter motor turns on.
E-40Description: Thermal Head ID error The CPU detects an abnormal ID signal from the thermal head.