Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh DSm2630 Top Searches

These results are ranked by popularity.

Error
SC272-01Description: LD Driver Communication Error If the value is not same when the machine reads and writes the same registration at the machine start-up. If the communication parity retries three consecutive times, the SC is generated.
SC559-00Description: Fusing Jam Detected for 3 Times Consecutively Fusing jam (does not reach fusing exit sensor) is detected for 3 times consecutively. • Detection conditions Displays the SC559-00 at the time of integrating the counter each time fusing jam occu
SC727-12Description: Internal Multi-fold Unit FD3000 Error Registration Motor Error Motor error (Encoder error) This is reported as a jam error when detected for the first time. If it occurs again in a row, its SC code appears.
SC864-02 ... SC864-23Description: HDD data CRC error During HDD operation, the HDD cannot respond to a CRC error query. Data transfer did not execute normally while data was being written to the HDD.
SC521-01, SC521-02Description: SC521- 01 Duplex Entrance Motor: Lock SC521-02 Duplex By-pass Motor: Lock During motor ON, after checking the motor error notification registers (err_velo and err_posi) for 500msec, the error state of either register was detected at least 5

Ricoh DSm2630 Common Errors

The most common error codes.

Error
SC272-01Description: LD Driver Communication Error If the value is not same when the machine reads and writes the same registration at the machine start-up. If the communication parity retries three consecutive times, the SC is generated.
SC559-00Description: Fusing Jam Detected for 3 Times Consecutively Fusing jam (does not reach fusing exit sensor) is detected for 3 times consecutively. • Detection conditions Displays the SC559-00 at the time of integrating the counter each time fusing jam occu
SC727-12Description: Internal Multi-fold Unit FD3000 Error Registration Motor Error Motor error (Encoder error) This is reported as a jam error when detected for the first time. If it occurs again in a row, its SC code appears.
SC864-02 ... SC864-23Description: HDD data CRC error During HDD operation, the HDD cannot respond to a CRC error query. Data transfer did not execute normally while data was being written to the HDD.
SC521-01, SC521-02Description: SC521- 01 Duplex Entrance Motor: Lock SC521-02 Duplex By-pass Motor: Lock During motor ON, after checking the motor error notification registers (err_velo and err_posi) for 500msec, the error state of either register was detected at least 5
SC272-01Description: LD Driver Communication Error If the value is not same when the machine reads and writes the same registration at the machine start-up. If the communication parity retries three consecutive times, the SC is generated.
SC559-00Description: Fusing Jam Detected for 3 Times Consecutively Fusing jam (does not reach fusing exit sensor) is detected for 3 times consecutively. • Detection conditions Displays the SC559-00 at the time of integrating the counter each time fusing jam occu
SC727-12Description: Internal Multi-fold Unit FD3000 Error Registration Motor Error Motor error (Encoder error) This is reported as a jam error when detected for the first time. If it occurs again in a row, its SC code appears.
SC864-02 ... SC864-23Description: HDD data CRC error During HDD operation, the HDD cannot respond to a CRC error query. Data transfer did not execute normally while data was being written to the HDD.
SC521-01, SC521-02Description: SC521- 01 Duplex Entrance Motor: Lock SC521-02 Duplex By-pass Motor: Lock During motor ON, after checking the motor error notification registers (err_velo and err_posi) for 500msec, the error state of either register was detected at least 5