These results are ranked by popularity.
| Error | |
|---|---|
| 503 | Description: 3rd tray error . The tray lift motor turns on. - The top of the paper stack is not detected for 13 seconds. . The tray is set. - The top of the paper stack is detected. - The bottom plate is lowered. - The stack detection is not cleared |
| 820 | Description: Self-diagnostics error: CPU [XXXX]: Detailed error code |
| 855 | Description: IEEE802.11b error |
| 560 | Description: Zero cross error The main switch is turned on; the fusing relay turns on. - 50 Hz or 60 Hz is not detected within 5 seconds. |
| 301 | Description: Charge corona unit disconnection The charge corona unit keeps outputting. - The unit is operating at the maximum PWM duty value for 60 milliseconds. |
The most common error codes.
| Error | |
|---|---|
| 503 | Description: 3rd tray error . The tray lift motor turns on. - The top of the paper stack is not detected for 13 seconds. . The tray is set. - The top of the paper stack is detected. - The bottom plate is lowered. - The stack detection is not cleared |
| 820 | Description: Self-diagnostics error: CPU [XXXX]: Detailed error code |
| 855 | Description: IEEE802.11b error |
| 560 | Description: Zero cross error The main switch is turned on; the fusing relay turns on. - 50 Hz or 60 Hz is not detected within 5 seconds. |
| 301 | Description: Charge corona unit disconnection The charge corona unit keeps outputting. - The unit is operating at the maximum PWM duty value for 60 milliseconds. |
| 820 | Description: Self-diagnostics error: CPU [XXXX]: Detailed error code |
| 503 | Description: 3rd tray error . The tray lift motor turns on. - The top of the paper stack is not detected for 13 seconds. . The tray is set. - The top of the paper stack is detected. - The bottom plate is lowered. - The stack detection is not cleared |
| 560 | Description: Zero cross error The main switch is turned on; the fusing relay turns on. - 50 Hz or 60 Hz is not detected within 5 seconds. |
| 301 | Description: Charge corona unit disconnection The charge corona unit keeps outputting. - The unit is operating at the maximum PWM duty value for 60 milliseconds. |
| 855 | Description: IEEE802.11b error |
