Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh CL4000HDN Top Searches

These results are ranked by popularity.

Error
452Description: Transfer roller contact error [D] The transfer roller contact sensor does not detect the movement of actuator at the sensor while the polygon motor rotates.
829Description: [0401] Self-diagnostic error . RAM: Verification error (Slot 1) The data stored in the RAM in Slot 1 does not match the data when reading.
240Description: LDB error [K] [D] The EGB detects LDB error a few times consecutively when LDB unit turns on after LDB initialisation.
820Description: [06FF] Self-diagnostic error. CPU: Detailed error code The pipeline clock frequency rate is different from the prescribed value.
820Description: [4002-4005] Self-diagnostic error. CPU: Detailed error code The calculation error in the CPU occurs.

Ricoh CL4000HDN Common Errors

The most common error codes.

Error
452Description: Transfer roller contact error [D] The transfer roller contact sensor does not detect the movement of actuator at the sensor while the polygon motor rotates.
829Description: [0401] Self-diagnostic error . RAM: Verification error (Slot 1) The data stored in the RAM in Slot 1 does not match the data when reading.
240Description: LDB error [K] [D] The EGB detects LDB error a few times consecutively when LDB unit turns on after LDB initialisation.
820Description: [06FF] Self-diagnostic error. CPU: Detailed error code The pipeline clock frequency rate is different from the prescribed value.
820Description: [4002-4005] Self-diagnostic error. CPU: Detailed error code The calculation error in the CPU occurs.
820Description: [0001-0015] [000A-000D] Self-diagnostic error. CPU: Detailed error code During the boot monitor program and selfdiagnostic, any exception or cut-in are not supposed to happen. If these happen, it is defined as SC.
820Description: [4002-4005] Self-diagnostic error. CPU: Detailed error code The calculation error in the CPU occurs.
452Description: Transfer roller contact error [D] The transfer roller contact sensor does not detect the movement of actuator at the sensor while the polygon motor rotates.
240Description: LDB error [K] [D] The EGB detects LDB error a few times consecutively when LDB unit turns on after LDB initialisation.
829Description: [0401] Self-diagnostic error . RAM: Verification error (Slot 1) The data stored in the RAM in Slot 1 does not match the data when reading.