Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh AP610 Top Searches

These results are ranked by popularity.

Error
818Description: System timeout error
302Description: Charge roller current leak A charge roller current leak signal is detected.
851Description: IEEE1394 interface error
836Description: Font ROM error
546Description: Unstable fusing temperature During standby, within 500 ms, the fusing temperature goes below 60 °C twice or over 60 °C three times. Within 1 minute, a 60 °C increase or decrease in fusing temperature is detected during five different one-sec

Ricoh AP610 Common Errors

The most common error codes.

Error
818Description: System timeout error
302Description: Charge roller current leak A charge roller current leak signal is detected.
851Description: IEEE1394 interface error
836Description: Font ROM error
546Description: Unstable fusing temperature During standby, within 500 ms, the fusing temperature goes below 60 °C twice or over 60 °C three times. Within 1 minute, a 60 °C increase or decrease in fusing temperature is detected during five different one-sec
818Description: System timeout error
302Description: Charge roller current leak A charge roller current leak signal is detected.
851Description: IEEE1394 interface error
836Description: Font ROM error
546Description: Unstable fusing temperature During standby, within 500 ms, the fusing temperature goes below 60 °C twice or over 60 °C three times. Within 1 minute, a 60 °C increase or decrease in fusing temperature is detected during five different one-sec