Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh AP4500 Top Searches

These results are ranked by popularity.

Error
SC726Description: Finisher Shift/Lift Motor Error Definition [B] 1) Tray shift does not finish within a certain time after the shift motor turned on. 2) The stack height sensor does not activate within a certain time after the shift tray lift motor turned on.
SC390-1Description: TD Sensor Error 1 Definition [B] The TD sensor output voltage is less than 0.5 V or more than 4.0 V 10 times consecutively during printing.
SC962Description: Memory Setting ID Error Definition [B] The ID that is sent from the memory when the IPU sent the memory ready signal is incorrect.
SC501-2Description: 1st Tray Lift Malfunction 2 Definition [C] If the main power switch is turned on when the paper is already at the feed height, the paper height position is detected again. At this time, the paper upper limit sensor should de-activate within
SC503-2Description: 3rd Tray Lift Malfunction 2 (Optional Paper Tray Unit) Definition [C] If the main power switch is turned on when the paper is already at the feed height, the paper height position is detected again. At this time, the paper upper limit sensor

Ricoh AP4500 Common Errors

The most common error codes.

Error
SC726Description: Finisher Shift/Lift Motor Error Definition [B] 1) Tray shift does not finish within a certain time after the shift motor turned on. 2) The stack height sensor does not activate within a certain time after the shift tray lift motor turned on.
SC390-1Description: TD Sensor Error 1 Definition [B] The TD sensor output voltage is less than 0.5 V or more than 4.0 V 10 times consecutively during printing.
SC962Description: Memory Setting ID Error Definition [B] The ID that is sent from the memory when the IPU sent the memory ready signal is incorrect.
SC501-2Description: 1st Tray Lift Malfunction 2 Definition [C] If the main power switch is turned on when the paper is already at the feed height, the paper height position is detected again. At this time, the paper upper limit sensor should de-activate within
SC503-2Description: 3rd Tray Lift Malfunction 2 (Optional Paper Tray Unit) Definition [C] If the main power switch is turned on when the paper is already at the feed height, the paper height position is detected again. At this time, the paper upper limit sensor
SC726Description: Finisher Shift/Lift Motor Error Definition [B] 1) Tray shift does not finish within a certain time after the shift motor turned on. 2) The stack height sensor does not activate within a certain time after the shift tray lift motor turned on.
SC390-1Description: TD Sensor Error 1 Definition [B] The TD sensor output voltage is less than 0.5 V or more than 4.0 V 10 times consecutively during printing.
SC962Description: Memory Setting ID Error Definition [B] The ID that is sent from the memory when the IPU sent the memory ready signal is incorrect.
SC501-2Description: 1st Tray Lift Malfunction 2 Definition [C] If the main power switch is turned on when the paper is already at the feed height, the paper height position is detected again. At this time, the paper upper limit sensor should de-activate within
SC503-2Description: 3rd Tray Lift Malfunction 2 (Optional Paper Tray Unit) Definition [C] If the main power switch is turned on when the paper is already at the feed height, the paper height position is detected again. At this time, the paper upper limit sensor