Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh AP2700 Top Searches

These results are ranked by popularity.

Error
SC392Description: TD sensor initial setting error Definition: [B] TD sensor output voltage falls out of the adjustment range after the TD sensor initial setting has been finished.
1601Description: Font ROM error
SC543Description: Fusing overheat error Definition: [A] A fusing temperature of over 230°C is detected for 1 second by the fusing thermistor.
SC 750Description: Interchange unit connection error Definition: [B] The engine board cannot communicate with the interchange unit properly when the duplex unit is installed.
SC733Description: Finisher stack feed-out motor error Definition: [B] The stack feed-out belt H.P sensor is not activated within a certain period after the stack feed-out motor is turned on.

Ricoh AP2700 Common Errors

The most common error codes.

Error
SC392Description: TD sensor initial setting error Definition: [B] TD sensor output voltage falls out of the adjustment range after the TD sensor initial setting has been finished.
1601Description: Font ROM error
SC543Description: Fusing overheat error Definition: [A] A fusing temperature of over 230°C is detected for 1 second by the fusing thermistor.
SC 750Description: Interchange unit connection error Definition: [B] The engine board cannot communicate with the interchange unit properly when the duplex unit is installed.
SC733Description: Finisher stack feed-out motor error Definition: [B] The stack feed-out belt H.P sensor is not activated within a certain period after the stack feed-out motor is turned on.
SC392Description: TD sensor initial setting error Definition: [B] TD sensor output voltage falls out of the adjustment range after the TD sensor initial setting has been finished.
1601Description: Font ROM error
SC543Description: Fusing overheat error Definition: [A] A fusing temperature of over 230°C is detected for 1 second by the fusing thermistor.
SC 750Description: Interchange unit connection error Definition: [B] The engine board cannot communicate with the interchange unit properly when the duplex unit is installed.
SC733Description: Finisher stack feed-out motor error Definition: [B] The stack feed-out belt H.P sensor is not activated within a certain period after the stack feed-out motor is turned on.