Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 700P Top Searches

These results are ranked by popularity.

Error
SC322Description: 1st laser synchronization error The 1st laser synchronization signal cannot be detected by the main scan synchronization detector board even if the laser diodes are activated.
SC960Description: Printer return ID error The ID that is sent from the IPU for the printer return signal is different from expected.
SC391Description: Image storage address error The SBICU receives an image data output request signal for data that is not stored in memory.
SC625Description: Communication error between BICU and finisher 1 The acknowledge signal does not come back from the finisher or mailbox to the BICU board 3 times consecutively.
SC337Description: Polygonal mirror motor error 3 The XSCRDY signal becomes high while the polygonal mirror motor turns on, even though there was no demand for either turning off the motor or changing the motor speed.

Ricoh Aficio 700P Common Errors

The most common error codes.

Error
SC322Description: 1st laser synchronization error The 1st laser synchronization signal cannot be detected by the main scan synchronization detector board even if the laser diodes are activated.
SC960Description: Printer return ID error The ID that is sent from the IPU for the printer return signal is different from expected.
SC391Description: Image storage address error The SBICU receives an image data output request signal for data that is not stored in memory.
SC625Description: Communication error between BICU and finisher 1 The acknowledge signal does not come back from the finisher or mailbox to the BICU board 3 times consecutively.
SC337Description: Polygonal mirror motor error 3 The XSCRDY signal becomes high while the polygonal mirror motor turns on, even though there was no demand for either turning off the motor or changing the motor speed.
SC322Description: 1st laser synchronization error The 1st laser synchronization signal cannot be detected by the main scan synchronization detector board even if the laser diodes are activated.
SC960Description: Printer return ID error The ID that is sent from the IPU for the printer return signal is different from expected.
SC625Description: Communication error between BICU and finisher 1 The acknowledge signal does not come back from the finisher or mailbox to the BICU board 3 times consecutively.
SC391Description: Image storage address error The SBICU receives an image data output request signal for data that is not stored in memory.
SC337Description: Polygonal mirror motor error 3 The XSCRDY signal becomes high while the polygonal mirror motor turns on, even though there was no demand for either turning off the motor or changing the motor speed.