Ricoh Aficio 500 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 500 Top Searches

These results are ranked by popularity.

Error
SC541Description: Fusing thermistor open The fusing temperature detected by the thermistor was below 7°C for 10 seconds.
SC322Description: Laser synchronization error 1 The laser synchronization signal can not be detected by the main scan synchroniziation detector board -1 just after the LD is turned on while the polygon mirror is rotating at operating speed.
SC720Description: Finisher transport drive motor error An abnormal motor condition is detected from the finisher transport drive motor.
SC440Description: Main motor lock A main motor lock signal is detected for more than 2 seconds.
SC101Description: Lamp regulator error Detects lamp regulator malfunctions by monitoring the signal for both the exposure lamp on and off signals.

Ricoh Aficio 500 Common Errors

The most common error codes.

Error
SC541Description: Fusing thermistor open The fusing temperature detected by the thermistor was below 7°C for 10 seconds.
SC322Description: Laser synchronization error 1 The laser synchronization signal can not be detected by the main scan synchroniziation detector board -1 just after the LD is turned on while the polygon mirror is rotating at operating speed.
SC720Description: Finisher transport drive motor error An abnormal motor condition is detected from the finisher transport drive motor.
SC440Description: Main motor lock A main motor lock signal is detected for more than 2 seconds.
SC101Description: Lamp regulator error Detects lamp regulator malfunctions by monitoring the signal for both the exposure lamp on and off signals.
SC541Description: Fusing thermistor open The fusing temperature detected by the thermistor was below 7°C for 10 seconds.
SC322Description: Laser synchronization error 1 The laser synchronization signal can not be detected by the main scan synchroniziation detector board -1 just after the LD is turned on while the polygon mirror is rotating at operating speed.
SC720Description: Finisher transport drive motor error An abnormal motor condition is detected from the finisher transport drive motor.
SC440Description: Main motor lock A main motor lock signal is detected for more than 2 seconds.
SC101Description: Lamp regulator error Detects lamp regulator malfunctions by monitoring the signal for both the exposure lamp on and off signals.