Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 480W Top Searches

These results are ranked by popularity.

Error
SC549Description: Pressure roller thermistor abnormal During fusing motor rotation, pressure roller temperature detected lower than 7°C (44.6°F) for 5 s.
SC864Description: HDD data CRC error
SC353Description: ID sensor error 4 - LED LED drive current (PWM value) is 255 or 0. This SC could occur while the ID sensor is initializing.
SC819Description: Fatal kernel error Due to a control error, a RAM overflow occurred during system processing. One of the following messages was displayed on the operation panel.
SC921Description: Printer error 2 When the application started, the necessary font was not on the SD card.

Ricoh Aficio 480W Common Errors

The most common error codes.

Error
SC549Description: Pressure roller thermistor abnormal During fusing motor rotation, pressure roller temperature detected lower than 7°C (44.6°F) for 5 s.
SC864Description: HDD data CRC error
SC353Description: ID sensor error 4 - LED LED drive current (PWM value) is 255 or 0. This SC could occur while the ID sensor is initializing.
SC819Description: Fatal kernel error Due to a control error, a RAM overflow occurred during system processing. One of the following messages was displayed on the operation panel.
SC921Description: Printer error 2 When the application started, the necessary font was not on the SD card.
SC549Description: Pressure roller thermistor abnormal During fusing motor rotation, pressure roller temperature detected lower than 7°C (44.6°F) for 5 s.
SC864Description: HDD data CRC error
SC353Description: ID sensor error 4 - LED LED drive current (PWM value) is 255 or 0. This SC could occur while the ID sensor is initializing.
SC819Description: Fatal kernel error Due to a control error, a RAM overflow occurred during system processing. One of the following messages was displayed on the operation panel.
SC921Description: Printer error 2 When the application started, the necessary font was not on the SD card.