Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio Color 4506 Top Searches

These results are ranked by popularity.

Error
SC452Description: Transfer belt mark detection error - Timing & Condition- The main control board does not receive the belt mark detection signal from the transfer belt home position sensor for a certain period.
SC722Description: Sorter jogger motor error The jogger does not return to its home position within the specified time. The jogger does not leave home position within the specified time.
SC191Description: Bar code scan error - Timing - Just after the main switch is turned on - Condition - The scanner IPU board detects that the bar code pattern scanned in is not appropriate.
SC543Description: Hot roller fusing lamp overheat - Timing - Every 1 second when the fusing unit is installed - Condition - The hot roller thermistor output is lower than about 0.3V, which corresponds to 220 °C, for 3 seconds continuously.
SC601Description: Scanner IPU communication error - Timing & Condition - After the main control board communicates successfully with the scanner IPU board once, a communication error is detected.

Ricoh Aficio Color 4506 Common Errors

The most common error codes.

Error
SC452Description: Transfer belt mark detection error - Timing & Condition- The main control board does not receive the belt mark detection signal from the transfer belt home position sensor for a certain period.
SC722Description: Sorter jogger motor error The jogger does not return to its home position within the specified time. The jogger does not leave home position within the specified time.
SC191Description: Bar code scan error - Timing - Just after the main switch is turned on - Condition - The scanner IPU board detects that the bar code pattern scanned in is not appropriate.
SC543Description: Hot roller fusing lamp overheat - Timing - Every 1 second when the fusing unit is installed - Condition - The hot roller thermistor output is lower than about 0.3V, which corresponds to 220 °C, for 3 seconds continuously.
SC601Description: Scanner IPU communication error - Timing & Condition - After the main control board communicates successfully with the scanner IPU board once, a communication error is detected.
SC452Description: Transfer belt mark detection error - Timing & Condition- The main control board does not receive the belt mark detection signal from the transfer belt home position sensor for a certain period.
SC722Description: Sorter jogger motor error The jogger does not return to its home position within the specified time. The jogger does not leave home position within the specified time.
SC191Description: Bar code scan error - Timing - Just after the main switch is turned on - Condition - The scanner IPU board detects that the bar code pattern scanned in is not appropriate.
SC543Description: Hot roller fusing lamp overheat - Timing - Every 1 second when the fusing unit is installed - Condition - The hot roller thermistor output is lower than about 0.3V, which corresponds to 220 °C, for 3 seconds continuously.
SC601Description: Scanner IPU communication error - Timing & Condition - After the main control board communicates successfully with the scanner IPU board once, a communication error is detected.