Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 450 Top Searches

These results are ranked by popularity.

Error
SC492Description: Cooling fan motor lock A cooling fan motor lock signal is not detected within 5 seconds after the cooling fan motor turns on.
SC726Description: Finisher shift/lift motor error 1) Tray shift does not finish within a certain time after the shift motor turned on. 2) The stack height sensor does not activate within a certain time after the shift tray lift motor turned on.
SC981Description: HDD response error The HDD control board does not generate any response when the IPU sends a read/write signal to the MSU.
SC542Description: Fusing temperature warming-up error The fusing temperature does not reach the fusing standby temperature within 125 seconds after the main power switch is turned on.
SC326Description: 2nd laser synchronization error The 2nd laser synchronization signal cannot be detected by the main scan synchronization detector board even if the laser diodes are activated.

Ricoh Aficio 450 Common Errors

The most common error codes.

Error
SC492Description: Cooling fan motor lock A cooling fan motor lock signal is not detected within 5 seconds after the cooling fan motor turns on.
SC726Description: Finisher shift/lift motor error 1) Tray shift does not finish within a certain time after the shift motor turned on. 2) The stack height sensor does not activate within a certain time after the shift tray lift motor turned on.
SC981Description: HDD response error The HDD control board does not generate any response when the IPU sends a read/write signal to the MSU.
SC542Description: Fusing temperature warming-up error The fusing temperature does not reach the fusing standby temperature within 125 seconds after the main power switch is turned on.
SC326Description: 2nd laser synchronization error The 2nd laser synchronization signal cannot be detected by the main scan synchronization detector board even if the laser diodes are activated.
SC492Description: Cooling fan motor lock A cooling fan motor lock signal is not detected within 5 seconds after the cooling fan motor turns on.
SC726Description: Finisher shift/lift motor error 1) Tray shift does not finish within a certain time after the shift motor turned on. 2) The stack height sensor does not activate within a certain time after the shift tray lift motor turned on.
SC981Description: HDD response error The HDD control board does not generate any response when the IPU sends a read/write signal to the MSU.
SC542Description: Fusing temperature warming-up error The fusing temperature does not reach the fusing standby temperature within 125 seconds after the main power switch is turned on.
SC326Description: 2nd laser synchronization error The 2nd laser synchronization signal cannot be detected by the main scan synchronization detector board even if the laser diodes are activated.