Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 345 Top Searches

These results are ranked by popularity.

Error
SC620-3Description: Communication error between BICU and ADF 3 The BICU sends a command to the ADF main board which does not operate an ADF function.
SC362Description: IMAC (image compression IC) error An error occurs during image processing in the IMAC, which handles image compression and image data transmission.
SC502-2Description: 2nd tray lift malfunction 2 If the main power switch is turned on when the paper is already at the feed height, the paper height position is detected again. At this time, the paper upper limit sensor should de-activate within 5 seconds afte
SC951Description: F-gate signal error 2 When the IPU has already received the F-gate signal, the IPU receives another F-gate signal.
SC 405Description: Transfer belt error The transfer belt does not move away from the drum during ID sensor pattern checking.

Ricoh Aficio 345 Common Errors

The most common error codes.

Error
SC620-3Description: Communication error between BICU and ADF 3 The BICU sends a command to the ADF main board which does not operate an ADF function.
SC362Description: IMAC (image compression IC) error An error occurs during image processing in the IMAC, which handles image compression and image data transmission.
SC502-2Description: 2nd tray lift malfunction 2 If the main power switch is turned on when the paper is already at the feed height, the paper height position is detected again. At this time, the paper upper limit sensor should de-activate within 5 seconds afte
SC951Description: F-gate signal error 2 When the IPU has already received the F-gate signal, the IPU receives another F-gate signal.
SC 405Description: Transfer belt error The transfer belt does not move away from the drum during ID sensor pattern checking.
SC620-3Description: Communication error between BICU and ADF 3 The BICU sends a command to the ADF main board which does not operate an ADF function.
SC362Description: IMAC (image compression IC) error An error occurs during image processing in the IMAC, which handles image compression and image data transmission.
SC502-2Description: 2nd tray lift malfunction 2 If the main power switch is turned on when the paper is already at the feed height, the paper height position is detected again. At this time, the paper upper limit sensor should de-activate within 5 seconds afte
SC951Description: F-gate signal error 2 When the IPU has already received the F-gate signal, the IPU receives another F-gate signal.
SC 405Description: Transfer belt error The transfer belt does not move away from the drum during ID sensor pattern checking.