Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 340 Top Searches

These results are ranked by popularity.

Error
SC362Description: IMAC (image compression IC) error An error occurs during image processing in the IMAC, which handles image compression and image data transmission.
SC620-3Description: Communication error between BICU and ADF 3 The BICU sends a command to the ADF main board which does not operate an ADF function.
SC951Description: F-gate signal error 2 When the IPU has already received the F-gate signal, the IPU receives another F-gate signal.
SC727Description: Finisher stapler rotation motor error 1) Stapler rotation does not finish within a certain time after the staple rotation motor turned on. 2) The stapler does not return to its home position within a certain time after stapling finished.
SC502-2Description: 2nd tray lift malfunction 2 If the main power switch is turned on when the paper is already at the feed height, the paper height position is detected again. At this time, the paper upper limit sensor should de-activate within 5 seconds afte

Ricoh Aficio 340 Common Errors

The most common error codes.

Error
SC362Description: IMAC (image compression IC) error An error occurs during image processing in the IMAC, which handles image compression and image data transmission.
SC620-3Description: Communication error between BICU and ADF 3 The BICU sends a command to the ADF main board which does not operate an ADF function.
SC951Description: F-gate signal error 2 When the IPU has already received the F-gate signal, the IPU receives another F-gate signal.
SC727Description: Finisher stapler rotation motor error 1) Stapler rotation does not finish within a certain time after the staple rotation motor turned on. 2) The stapler does not return to its home position within a certain time after stapling finished.
SC502-2Description: 2nd tray lift malfunction 2 If the main power switch is turned on when the paper is already at the feed height, the paper height position is detected again. At this time, the paper upper limit sensor should de-activate within 5 seconds afte
SC362Description: IMAC (image compression IC) error An error occurs during image processing in the IMAC, which handles image compression and image data transmission.
SC620-3Description: Communication error between BICU and ADF 3 The BICU sends a command to the ADF main board which does not operate an ADF function.
SC951Description: F-gate signal error 2 When the IPU has already received the F-gate signal, the IPU receives another F-gate signal.
SC727Description: Finisher stapler rotation motor error 1) Stapler rotation does not finish within a certain time after the staple rotation motor turned on. 2) The stapler does not return to its home position within a certain time after stapling finished.
SC502-2Description: 2nd tray lift malfunction 2 If the main power switch is turned on when the paper is already at the feed height, the paper height position is detected again. At this time, the paper upper limit sensor should de-activate within 5 seconds afte