Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 3260C Top Searches

These results are ranked by popularity.

Error
SC224Description: Laser Synchronization Detector Error 1: M Leading Edge: LD0 While the polygon motor is rotating normally, no synchronizing detection signal is output for LD0 magenta, leading edge, even after the laser diode has been firing for 2 sec.
SC506Description: Tandem tray back fence motor error The back fence should be closed but the fence was not detected in the closed position within 500 ms. -or- The back fence should be open but the fence was not detected in the open within 500 ms.
SC990Description: Software error 2 The software performs an unexpected function and the program cannot continue
SC326Description: Development motor error 3: C The PLL lock signal remained HIGH or LOW for longer than the prescribed time for the development motor of the affected color.
SC633Description: Key/card counter device error 2 During communication with the device, the BCU received a break (Low) signal.

Ricoh Aficio 3260C Common Errors

The most common error codes.

Error
SC224Description: Laser Synchronization Detector Error 1: M Leading Edge: LD0 While the polygon motor is rotating normally, no synchronizing detection signal is output for LD0 magenta, leading edge, even after the laser diode has been firing for 2 sec.
SC506Description: Tandem tray back fence motor error The back fence should be closed but the fence was not detected in the closed position within 500 ms. -or- The back fence should be open but the fence was not detected in the open within 500 ms.
SC990Description: Software error 2 The software performs an unexpected function and the program cannot continue
SC326Description: Development motor error 3: C The PLL lock signal remained HIGH or LOW for longer than the prescribed time for the development motor of the affected color.
SC633Description: Key/card counter device error 2 During communication with the device, the BCU received a break (Low) signal.
SC224Description: Laser Synchronization Detector Error 1: M Leading Edge: LD0 While the polygon motor is rotating normally, no synchronizing detection signal is output for LD0 magenta, leading edge, even after the laser diode has been firing for 2 sec.
SC506Description: Tandem tray back fence motor error The back fence should be closed but the fence was not detected in the closed position within 500 ms. -or- The back fence should be open but the fence was not detected in the open within 500 ms.
SC326Description: Development motor error 3: C The PLL lock signal remained HIGH or LOW for longer than the prescribed time for the development motor of the affected color.
SC633Description: Key/card counter device error 2 During communication with the device, the BCU received a break (Low) signal.
SC990Description: Software error 2 The software performs an unexpected function and the program cannot continue