Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 3245C Top Searches

These results are ranked by popularity.

Error
861Description: HDD: Reboot error
373Description: TD sensor [M] : Adjustment error
551Description: Pressure roller thermistor error The measured pressure roller temperature does not reach 7°C for 60 seconds.
741Description: Booklet finisher paddle motor error • The paddle home position sensor does not turn off within 2 seconds after the paddles start to move. • The paddle home position sensor does not turn on within 2 seconds after the paddles start to operate
633Description: MF accounting device error 2 After communication is established, the controller receives the brake signal from the accounting device.

Ricoh Aficio 3245C Common Errors

The most common error codes.

Error
861Description: HDD: Reboot error
373Description: TD sensor [M] : Adjustment error
551Description: Pressure roller thermistor error The measured pressure roller temperature does not reach 7°C for 60 seconds.
741Description: Booklet finisher paddle motor error • The paddle home position sensor does not turn off within 2 seconds after the paddles start to move. • The paddle home position sensor does not turn on within 2 seconds after the paddles start to operate
633Description: MF accounting device error 2 After communication is established, the controller receives the brake signal from the accounting device.
861Description: HDD: Reboot error
373Description: TD sensor [M] : Adjustment error
551Description: Pressure roller thermistor error The measured pressure roller temperature does not reach 7°C for 60 seconds.
741Description: Booklet finisher paddle motor error • The paddle home position sensor does not turn off within 2 seconds after the paddles start to move. • The paddle home position sensor does not turn on within 2 seconds after the paddles start to operate
633Description: MF accounting device error 2 After communication is established, the controller receives the brake signal from the accounting device.