Ricoh Aficio 3232C Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 3232C Top Searches

These results are ranked by popularity.

Error
461Description: Humidity sensor error The output is 4.5 V (or higher) or 0.3 V (or lower) for 12 seconds.
685Description: SBU/IPU communication error While data is sent between the scanner and BICU board, a communication error has occurred.
826Description: Self-diagnostic Error: RTC/Optional NVRAM
221Description: 2nd beam synchronization error A polygon motor lock is detected; the LD door is closed; and the LD remains on. The LD error (2nd beam synchronization error) continues for 0.5 seconds.
547Description: Zero cross error The main power is turned on and the machine checks how many zero-cross signals are generated during 500 ms. If the number of zero-cross signal generated is more than 66 or less than 45 and when this condition is detected 10

Ricoh Aficio 3232C Common Errors

The most common error codes.

Error
461Description: Humidity sensor error The output is 4.5 V (or higher) or 0.3 V (or lower) for 12 seconds.
685Description: SBU/IPU communication error While data is sent between the scanner and BICU board, a communication error has occurred.
826Description: Self-diagnostic Error: RTC/Optional NVRAM
221Description: 2nd beam synchronization error A polygon motor lock is detected; the LD door is closed; and the LD remains on. The LD error (2nd beam synchronization error) continues for 0.5 seconds.
547Description: Zero cross error The main power is turned on and the machine checks how many zero-cross signals are generated during 500 ms. If the number of zero-cross signal generated is more than 66 or less than 45 and when this condition is detected 10
461Description: Humidity sensor error The output is 4.5 V (or higher) or 0.3 V (or lower) for 12 seconds.
685Description: SBU/IPU communication error While data is sent between the scanner and BICU board, a communication error has occurred.
826Description: Self-diagnostic Error: RTC/Optional NVRAM
221Description: 2nd beam synchronization error A polygon motor lock is detected; the LD door is closed; and the LD remains on. The LD error (2nd beam synchronization error) continues for 0.5 seconds.
547Description: Zero cross error The main power is turned on and the machine checks how many zero-cross signals are generated during 500 ms. If the number of zero-cross signal generated is more than 66 or less than 45 and when this condition is detected 10