Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 3228C Top Searches

These results are ranked by popularity.

Error
353Description: Development motor 2 error • Development motor 2 changes its speed from half to normal. 3) Motor 2 does not detect a 0.3second lock signal within 0.9 seconds. 4) Motor 2 does not detect the lock signal for 0.3 seconds after it detected a 0.3
990Description: Software performance error
620Description: ADF communication error The ADF has been detected. A communication error has occurred.
808Description: Startup without video input end error (R) Video transfer to the engine is started, but a video transmission end command is not issued by the scanner within the specified time.
101Description: Exposure lamp error The standard white level is not properly detected when scanning the shading plate. (The shading data peak does not reach the specified threshold.)

Ricoh Aficio 3228C Common Errors

The most common error codes.

Error
353Description: Development motor 2 error • Development motor 2 changes its speed from half to normal. 3) Motor 2 does not detect a 0.3second lock signal within 0.9 seconds. 4) Motor 2 does not detect the lock signal for 0.3 seconds after it detected a 0.3
990Description: Software performance error
620Description: ADF communication error The ADF has been detected. A communication error has occurred.
808Description: Startup without video input end error (R) Video transfer to the engine is started, but a video transmission end command is not issued by the scanner within the specified time.
101Description: Exposure lamp error The standard white level is not properly detected when scanning the shading plate. (The shading data peak does not reach the specified threshold.)
353Description: Development motor 2 error • Development motor 2 changes its speed from half to normal. 3) Motor 2 does not detect a 0.3second lock signal within 0.9 seconds. 4) Motor 2 does not detect the lock signal for 0.3 seconds after it detected a 0.3
808Description: Startup without video input end error (R) Video transfer to the engine is started, but a video transmission end command is not issued by the scanner within the specified time.
990Description: Software performance error
620Description: ADF communication error The ADF has been detected. A communication error has occurred.
101Description: Exposure lamp error The standard white level is not properly detected when scanning the shading plate. (The shading data peak does not reach the specified threshold.)