Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 3224C Top Searches

These results are ranked by popularity.

Error
808Description: Startup without video input end error (R) Video transfer to the engine is started, but a video transmission end command is not issued by the scanner within the specified time.
353Description: Development motor 2 error • Development motor 2 changes its speed from half to normal. 3) Motor 2 does not detect a 0.3second lock signal within 0.9 seconds. 4) Motor 2 does not detect the lock signal for 0.3 seconds after it detected a 0.3
990Description: Software performance error
620Description: ADF communication error The ADF has been detected. A communication error has occurred.
725Description: Finisher stack feed-out motor error (1000-sheet finisher) The stack feed-out motor jam is detected consecutively twice after the stack feed-out motor turned on.

Ricoh Aficio 3224C Common Errors

The most common error codes.

Error
808Description: Startup without video input end error (R) Video transfer to the engine is started, but a video transmission end command is not issued by the scanner within the specified time.
353Description: Development motor 2 error • Development motor 2 changes its speed from half to normal. 3) Motor 2 does not detect a 0.3second lock signal within 0.9 seconds. 4) Motor 2 does not detect the lock signal for 0.3 seconds after it detected a 0.3
990Description: Software performance error
620Description: ADF communication error The ADF has been detected. A communication error has occurred.
725Description: Finisher stack feed-out motor error (1000-sheet finisher) The stack feed-out motor jam is detected consecutively twice after the stack feed-out motor turned on.
808Description: Startup without video input end error (R) Video transfer to the engine is started, but a video transmission end command is not issued by the scanner within the specified time.
353Description: Development motor 2 error • Development motor 2 changes its speed from half to normal. 3) Motor 2 does not detect a 0.3second lock signal within 0.9 seconds. 4) Motor 2 does not detect the lock signal for 0.3 seconds after it detected a 0.3
990Description: Software performance error
620Description: ADF communication error The ADF has been detected. A communication error has occurred.
725Description: Finisher stack feed-out motor error (1000-sheet finisher) The stack feed-out motor jam is detected consecutively twice after the stack feed-out motor turned on.