Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 3035G Top Searches

These results are ranked by popularity.

Error
621Description: Communication timeout error between BICU and finisher or mailbox A break (low) signal was received from the finisher or the mailbox.
353Description: ID sensor, LED current abnormal at initialization One of the following ID sensor output voltages is detected at ID sensor initialization. 1) Vsg < 4.0V when the maximum PWM input (255) is applied to the ID sensor. 2) Vsg >= 4.0V when the mi
986Description: Software write parameter setting error
827Description: Self-diagnostic Error: RAM
503Description: 3rd tray lift malfunction (optional paper tray unit) The paper height sensor is not activated after the tray lift motor has been on for 13 seconds. If the main power switch is turned on when the paper is already at the feed height, the pape

Ricoh Aficio 3035G Common Errors

The most common error codes.

Error
621Description: Communication timeout error between BICU and finisher or mailbox A break (low) signal was received from the finisher or the mailbox.
353Description: ID sensor, LED current abnormal at initialization One of the following ID sensor output voltages is detected at ID sensor initialization. 1) Vsg < 4.0V when the maximum PWM input (255) is applied to the ID sensor. 2) Vsg >= 4.0V when the mi
986Description: Software write parameter setting error
827Description: Self-diagnostic Error: RAM
503Description: 3rd tray lift malfunction (optional paper tray unit) The paper height sensor is not activated after the tray lift motor has been on for 13 seconds. If the main power switch is turned on when the paper is already at the feed height, the pape
621Description: Communication timeout error between BICU and finisher or mailbox A break (low) signal was received from the finisher or the mailbox.
353Description: ID sensor, LED current abnormal at initialization One of the following ID sensor output voltages is detected at ID sensor initialization. 1) Vsg < 4.0V when the maximum PWM input (255) is applied to the ID sensor. 2) Vsg >= 4.0V when the mi
986Description: Software write parameter setting error
827Description: Self-diagnostic Error: RAM
503Description: 3rd tray lift malfunction (optional paper tray unit) The paper height sensor is not activated after the tray lift motor has been on for 13 seconds. If the main power switch is turned on when the paper is already at the feed height, the pape