Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 3025 Top Searches

These results are ranked by popularity.

Error
840Description: EEPROM error 1 During input/output with the EEPROM on the controller board, one of the following errors occurred: • A read error occurred and continued after 3 retries. • A write error occurred.
990Description: Software performance error The software attempted to perform an unexpected operation.
351Description: ID sensor calibration - Error 2 The following conditions occurred simultaneously when the ID sensor pattern was calibrated during printing: • Vsg = 5V • PWM = 0 (LED current drop)
612Description: Communication command error between SBCU and ADF
862Description: HDD error 2 Maximum number of bad sectors detected on HD. Up to 101 bad sectors have appeared in the area on the hard disk where image data is archived, and the hard disk may require replacement.

Ricoh Aficio 3025 Common Errors

The most common error codes.

Error
840Description: EEPROM error 1 During input/output with the EEPROM on the controller board, one of the following errors occurred: • A read error occurred and continued after 3 retries. • A write error occurred.
990Description: Software performance error The software attempted to perform an unexpected operation.
351Description: ID sensor calibration - Error 2 The following conditions occurred simultaneously when the ID sensor pattern was calibrated during printing: • Vsg = 5V • PWM = 0 (LED current drop)
612Description: Communication command error between SBCU and ADF
862Description: HDD error 2 Maximum number of bad sectors detected on HD. Up to 101 bad sectors have appeared in the area on the hard disk where image data is archived, and the hard disk may require replacement.
840Description: EEPROM error 1 During input/output with the EEPROM on the controller board, one of the following errors occurred: • A read error occurred and continued after 3 retries. • A write error occurred.
990Description: Software performance error The software attempted to perform an unexpected operation.
351Description: ID sensor calibration - Error 2 The following conditions occurred simultaneously when the ID sensor pattern was calibrated during printing: • Vsg = 5V • PWM = 0 (LED current drop)
612Description: Communication command error between SBCU and ADF
862Description: HDD error 2 Maximum number of bad sectors detected on HD. Up to 101 bad sectors have appeared in the area on the hard disk where image data is archived, and the hard disk may require replacement.