Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 270 Top Searches

These results are ranked by popularity.

Error
SC990Description: Communication error between BICU and IOCSS board The BICU board cannot communicate with the IOB.
SC503Description: 3rd paper tray lift motor malfunction (optional paper tray unit) The paper lift sensor is not activated after the tray lift motor has been on for 18 seconds.
SC691Description: Communication error between BICU and fax controller The BICU board cannot communicate with the fax controller properly.
SC547Description: Zero cross signal malfunction Zero cross signals are not detected within a certain period.
SC101Description: Exposure lamp error The standard while level was not detected properly when scanning the white plate.

Ricoh Aficio 270 Common Errors

The most common error codes.

Error
SC990Description: Communication error between BICU and IOCSS board The BICU board cannot communicate with the IOB.
SC503Description: 3rd paper tray lift motor malfunction (optional paper tray unit) The paper lift sensor is not activated after the tray lift motor has been on for 18 seconds.
SC691Description: Communication error between BICU and fax controller The BICU board cannot communicate with the fax controller properly.
SC547Description: Zero cross signal malfunction Zero cross signals are not detected within a certain period.
SC101Description: Exposure lamp error The standard while level was not detected properly when scanning the white plate.
SC990Description: Communication error between BICU and IOCSS board The BICU board cannot communicate with the IOB.
SC503Description: 3rd paper tray lift motor malfunction (optional paper tray unit) The paper lift sensor is not activated after the tray lift motor has been on for 18 seconds.
SC691Description: Communication error between BICU and fax controller The BICU board cannot communicate with the fax controller properly.
SC547Description: Zero cross signal malfunction Zero cross signals are not detected within a certain period.
SC101Description: Exposure lamp error The standard while level was not detected properly when scanning the white plate.