Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 250 Top Searches

These results are ranked by popularity.

Error
SC542Description: Fusing temperature warm-up error The fusing temperature does not reach the fusing standby temperature within 50 seconds after the main switch is turned on.
SC980Description: Program loading error The program cannot load properly.
SC120Description: Scanner home position error 1 The scanner home position sensor does not detect the off condition during initialization or copying.
SC390Description: TD sensor error 1 The TD sensor outputs less than 0.5V, 20 s after the TD sensor initial setting has been performed.
SC543Description: Fusing overheat error A fusing temperature of over 231°C is detected for 1 second by the fusing thermistor.

Ricoh Aficio 250 Common Errors

The most common error codes.

Error
SC542Description: Fusing temperature warm-up error The fusing temperature does not reach the fusing standby temperature within 50 seconds after the main switch is turned on.
SC980Description: Program loading error The program cannot load properly.
SC120Description: Scanner home position error 1 The scanner home position sensor does not detect the off condition during initialization or copying.
SC390Description: TD sensor error 1 The TD sensor outputs less than 0.5V, 20 s after the TD sensor initial setting has been performed.
SC543Description: Fusing overheat error A fusing temperature of over 231°C is detected for 1 second by the fusing thermistor.
SC542Description: Fusing temperature warm-up error The fusing temperature does not reach the fusing standby temperature within 50 seconds after the main switch is turned on.
SC980Description: Program loading error The program cannot load properly.
SC120Description: Scanner home position error 1 The scanner home position sensor does not detect the off condition during initialization or copying.
SC390Description: TD sensor error 1 The TD sensor outputs less than 0.5V, 20 s after the TD sensor initial setting has been performed.
SC543Description: Fusing overheat error A fusing temperature of over 231°C is detected for 1 second by the fusing thermistor.