Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 240W Top Searches

These results are ranked by popularity.

Error
543Description: Fusing Lamp Overheated: Error 1 (Software) A fusing temperature more than 230 °C (446°F) was detected 3 times (measured at 180 ms intervals). Note: A shorted triac or other problem could cause the fusing lamp to stay on.
630Description: CSS Communication Error (Japan Only) The machine sent a report on its condition, but CSS detected an error. There is a problem on the telephone line between the machine location and the CSS center.
300Description: Charge Corona Output Error The charge-corona feedback voltage was less than 1 V for more than 200 ms.
901Description: Mechanical Total Counter The mechanical counter is not connected.
440Description: Transfer Output Error A high voltage feedback voltage of less than 1.0 V was detected for 200 ms.

Ricoh Aficio 240W Common Errors

The most common error codes.

Error
543Description: Fusing Lamp Overheated: Error 1 (Software) A fusing temperature more than 230 °C (446°F) was detected 3 times (measured at 180 ms intervals). Note: A shorted triac or other problem could cause the fusing lamp to stay on.
630Description: CSS Communication Error (Japan Only) The machine sent a report on its condition, but CSS detected an error. There is a problem on the telephone line between the machine location and the CSS center.
300Description: Charge Corona Output Error The charge-corona feedback voltage was less than 1 V for more than 200 ms.
901Description: Mechanical Total Counter The mechanical counter is not connected.
440Description: Transfer Output Error A high voltage feedback voltage of less than 1.0 V was detected for 200 ms.
543Description: Fusing Lamp Overheated: Error 1 (Software) A fusing temperature more than 230 °C (446°F) was detected 3 times (measured at 180 ms intervals). Note: A shorted triac or other problem could cause the fusing lamp to stay on.
630Description: CSS Communication Error (Japan Only) The machine sent a report on its condition, but CSS detected an error. There is a problem on the telephone line between the machine location and the CSS center.
300Description: Charge Corona Output Error The charge-corona feedback voltage was less than 1 V for more than 200 ms.
901Description: Mechanical Total Counter The mechanical counter is not connected.
440Description: Transfer Output Error A high voltage feedback voltage of less than 1.0 V was detected for 200 ms.