Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 2045G Top Searches

These results are ranked by popularity.

Error
352Description: ID sensor, pattern edge detect error The ID sensor pattern edge voltage is detected to be not 2.5V twice consecutively during an 800 ms interval.
621Description: Communication timeout error between BICU and finisher or mailbox A break (low) signal was received from the finisher or the mailbox.
827Description: Self-diagnostic Error: RAM The resident RAM returned a verify error during the self-diagnostic test.
986Description: Software write parameter setting error An unstable area at the storage destination in the settings table is set NULL for the parameter received by the write module.
691Description: GAVD FCI block I2C bus error

Ricoh Aficio 2045G Common Errors

The most common error codes.

Error
352Description: ID sensor, pattern edge detect error The ID sensor pattern edge voltage is detected to be not 2.5V twice consecutively during an 800 ms interval.
621Description: Communication timeout error between BICU and finisher or mailbox A break (low) signal was received from the finisher or the mailbox.
827Description: Self-diagnostic Error: RAM The resident RAM returned a verify error during the self-diagnostic test.
986Description: Software write parameter setting error An unstable area at the storage destination in the settings table is set NULL for the parameter received by the write module.
691Description: GAVD FCI block I2C bus error
352Description: ID sensor, pattern edge detect error The ID sensor pattern edge voltage is detected to be not 2.5V twice consecutively during an 800 ms interval.
621Description: Communication timeout error between BICU and finisher or mailbox A break (low) signal was received from the finisher or the mailbox.
827Description: Self-diagnostic Error: RAM The resident RAM returned a verify error during the self-diagnostic test.
986Description: Software write parameter setting error An unstable area at the storage destination in the settings table is set NULL for the parameter received by the write module.
691Description: GAVD FCI block I2C bus error