Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 2035 Top Searches

These results are ranked by popularity.

Error
352Description: ID sensor, pattern edge detect error The ID sensor pattern edge voltage is detected to be not 2.5V twice consecutively during an 800 ms interval.
827Description: Self-diagnostic Error: RAM The resident RAM returned a verify error during the self-diagnostic test.
986Description: Software write parameter setting error An unstable area at the storage destination in the settings table is set NULL for the parameter received by the write module.
621Description: Communication timeout error between BICU and finisher or mailbox A break (low) signal was received from the finisher or the mailbox.
853Description: Wireless LAN Error: Card Error 1 The wireless LAN board can be accessed, but the wireless LAN card (IEEE 802.11b or Bluetooth) cannot access the board.

Ricoh Aficio 2035 Common Errors

The most common error codes.

Error
352Description: ID sensor, pattern edge detect error The ID sensor pattern edge voltage is detected to be not 2.5V twice consecutively during an 800 ms interval.
827Description: Self-diagnostic Error: RAM The resident RAM returned a verify error during the self-diagnostic test.
986Description: Software write parameter setting error An unstable area at the storage destination in the settings table is set NULL for the parameter received by the write module.
621Description: Communication timeout error between BICU and finisher or mailbox A break (low) signal was received from the finisher or the mailbox.
853Description: Wireless LAN Error: Card Error 1 The wireless LAN board can be accessed, but the wireless LAN card (IEEE 802.11b or Bluetooth) cannot access the board.
352Description: ID sensor, pattern edge detect error The ID sensor pattern edge voltage is detected to be not 2.5V twice consecutively during an 800 ms interval.
986Description: Software write parameter setting error An unstable area at the storage destination in the settings table is set NULL for the parameter received by the write module.
827Description: Self-diagnostic Error: RAM The resident RAM returned a verify error during the self-diagnostic test.
621Description: Communication timeout error between BICU and finisher or mailbox A break (low) signal was received from the finisher or the mailbox.
853Description: Wireless LAN Error: Card Error 1 The wireless LAN board can be accessed, but the wireless LAN card (IEEE 802.11b or Bluetooth) cannot access the board.