Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 2032 Top Searches

These results are ranked by popularity.

Error
354Description: ID Sensor Adjustment Error 2 Error occurred during automatic adjustment of Vsg. Vsg could not be adjusted to 4.0V±0.2V within 50 ms even after 20 attempts.
633Description: Counter device error 2 After 3 attempts to send a data frame to the optional counter device via the serial communication line, no ACK signal was received within 100 ms.
995Description: Machine Type Information Error After the machine is powered on, a mismatch is detected between the CPM information sent from the controller to the engine. The controller boards of the B089 (22 cpm) and B94 (27 cpm) are not interchangeable.
835Description: Self-Diagnostic Error: Parallel Interface Loopback test error.
101Description: Exposure lamp error The standard white level was not detected properly when scanning the white plate.

Ricoh Aficio 2032 Common Errors

The most common error codes.

Error
354Description: ID Sensor Adjustment Error 2 Error occurred during automatic adjustment of Vsg. Vsg could not be adjusted to 4.0V±0.2V within 50 ms even after 20 attempts.
633Description: Counter device error 2 After 3 attempts to send a data frame to the optional counter device via the serial communication line, no ACK signal was received within 100 ms.
995Description: Machine Type Information Error After the machine is powered on, a mismatch is detected between the CPM information sent from the controller to the engine. The controller boards of the B089 (22 cpm) and B94 (27 cpm) are not interchangeable.
835Description: Self-Diagnostic Error: Parallel Interface Loopback test error.
101Description: Exposure lamp error The standard white level was not detected properly when scanning the white plate.
354Description: ID Sensor Adjustment Error 2 Error occurred during automatic adjustment of Vsg. Vsg could not be adjusted to 4.0V±0.2V within 50 ms even after 20 attempts.
633Description: Counter device error 2 After 3 attempts to send a data frame to the optional counter device via the serial communication line, no ACK signal was received within 100 ms.
995Description: Machine Type Information Error After the machine is powered on, a mismatch is detected between the CPM information sent from the controller to the engine. The controller boards of the B089 (22 cpm) and B94 (27 cpm) are not interchangeable.
835Description: Self-Diagnostic Error: Parallel Interface Loopback test error.
101Description: Exposure lamp error The standard white level was not detected properly when scanning the white plate.