Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 2027 Top Searches

These results are ranked by popularity.

Error
724Description: Finisher staple hammer motor error (1000-sheet finisher) Stapling does not finish within 600 ms after the staple hammer motor turned on.
855Description: Wireless LAN card error 3 An error was detected for the wireless LAN card (802.11b or Bluetooth).
490Description: Toner supply motor leak error Over 1 A supplied to the toner supply motor for longer than 200 ms
545Description: Fusing overheat error 3 After warmup, the hot roller attained full operating temperature and maintained this temperature for 10 sec. without the hot roller rotating.
819Description: Kernel mismatch error Software bug

Ricoh Aficio 2027 Common Errors

The most common error codes.

Error
724Description: Finisher staple hammer motor error (1000-sheet finisher) Stapling does not finish within 600 ms after the staple hammer motor turned on.
855Description: Wireless LAN card error 3 An error was detected for the wireless LAN card (802.11b or Bluetooth).
490Description: Toner supply motor leak error Over 1 A supplied to the toner supply motor for longer than 200 ms
545Description: Fusing overheat error 3 After warmup, the hot roller attained full operating temperature and maintained this temperature for 10 sec. without the hot roller rotating.
819Description: Kernel mismatch error Software bug
724Description: Finisher staple hammer motor error (1000-sheet finisher) Stapling does not finish within 600 ms after the staple hammer motor turned on.
855Description: Wireless LAN card error 3 An error was detected for the wireless LAN card (802.11b or Bluetooth).
490Description: Toner supply motor leak error Over 1 A supplied to the toner supply motor for longer than 200 ms
545Description: Fusing overheat error 3 After warmup, the hot roller attained full operating temperature and maintained this temperature for 10 sec. without the hot roller rotating.
819Description: Kernel mismatch error Software bug